COMPRO U2800F - START UP GUIDE Manual page 14

Autoscan
The first time you start ComproDTV 4, Autoscan will automatically scan for
available TV channels for TV signals. Please select your TV source from
analog cable/antenna or from digital antenna. You can rescan the channels at
any time by pressing the Autoscan button. Also, you can enable the advanced
autoscan for more precision scan result.
When Autoscan is finished, detected channels are automatically enabled and
marked with the green check mark
not be detected, are disabled and marked with a blank. However, you can
interrupt the scanning process by pressing the Stop button.
After you are finished scanning for available channels, you may select OK to
return to the display window, or customize the channel orders according to
your preferences.
Channel Naming
You can customize the channel names by double-click on the CH Name field of
the channel you wish to rename.
You can do more changes on the channel's property by right-click the mouse
on the Description field of the channel you wish to edit.
Custom Settings for each channel
14
. Channels, where a valid signal could