Installation; Remote Control For Videomate U2600F - COMPRO U2600F - START UP GUIDE Manual

Installation

Start the computer. Make sure VideoMate U2600F is connected to your
computer and insert the installation CD into your CD drive.
Step 1. After restarting, Windows will detect a new device and start the
Add/Remove Hardware Wizard, please press Cancel and go to the
next step.
Step 2. Insert the installation CD into your CD drive. If you have Autorun
enabled, the installer will start automatically. (If Autorun is disabled,
double-click on "setup.exe" on the installation CD.) You can choose
Complete to install all necessary software (VideoMate U2600F
drivers, ComproDTV, and ComproFM 2) or choose Custom to select
item by item. Compro recommends you choose Complete.
Step 3. Press Next to install ComproDTV,
Step 4. After each program is successfully installed, press Finish to proceed.
Step 5. When installation completes, press Finish to restart computer.
Step 6. Connect the digital or analog TV signal and open ComproDTV to
enjoy the show.

Remote Control for VideoMate U2600F

Compro VideoMate U2600F bundles the easy-to-use remote control to
controls the ComproDTV
Icon ComproDTV 4
ZOOM Zoom In/Out
DVD On/Off ComproDVD 2
MUTE On/Off Mute
TV On/Off ComproDTV
0-9 Number keys
CHAN Switch channels
VOL Volume
REC Record
TV/VIDEO Not used
Backward Replay
Play/Pause Pause or timeshifting
Stop Stop
Forward Advance
CC Not used
RECALL Previous channel
SURF Channel surf
MTS Audio select
Snapshot Snapshot
SLEEP Sleep function
A, B Not used
5