Sunblaster NANDTECH T5 Installation Instructions

SUNBLASTER
NANDTECH T5 REFLECTOR
INSTALLATION INSTRUCTIONS
Installation is a very simple process:
• Remove your NanoTech TS Reflector from its package.
• Remove the lamp from the Sun Blaster TSHO fixture.
• Slightly squeeze and place guide edge of the reflector into the metal groove on the
Sun Blaster TSHO fixture and snap it into place.
• Remove the clear plastic protective covering from the NanoTech TS Reflector.
• Replace SunBiaster HO Lamp.
• Your installation is complete.
Easy to Install -
Simply snap on to the light
:]; Remove the lamp from the Sun Blaster
T5
HO
fixture
rj:,
Slightly squeeze and place guide edge
into the metal groove ... snap into place
:)) Replace SunBiaster
HO
lamp
NEW FADM SUNBL.A.STER
NANODOME
Take your propagation to the next level.
CONTACT YOUR LOCAL RETAILER FOR MORE
INFORMATION
CR\l:siM~fli!:tlttE
rillS Elni l"..DS $AI~
RAlliS PUJS lWIDfJ
Enjoy your new
TSHO
Light check on www.sunblasterlighting.com for other exciting products from the leading
manufacturer in
TSHO
Lights
NEED HELP? CONTACT TECHNICAL
I
WARRANTY SUPPORT TOLL FREE NORTH AMERICA 1-866-491-0255
VISIT US ONLINE sunblasterlighting.com or Email us: info@sunblasterlighting.com