Design Toscano TF-10015 Instructions

INSTRUCTIONS
PRODUCT
OR
YOUR
Step 1
Release two nuts (E) and lift
up upper lamp assembly
(D) and base cap (F).
Step 2
While holding upper lamp
assembly (D) and base cap (F),
insert bulb (not included) into
socket (G). The bulb must
comply with the wattage label
marked (7 Watt, Type E12 bulb).
Step 3
Gently set upper lamp assembly
(D) and base cap (F) upon screws
on base (H). Secure two nuts (E)
on screw heads and tighten.
Notes Shade colors will appear darker and
less vibrant when not illuminated. This stained
glass product has been protected with mineral
oil as part of the finishing process. Please use
a soft cloth to remove any excess oil.
Warning California Residents Proposition 65
This product contains lead, a chemical known
to the state of California to cause cancer and
birth defects or other reproductive harm. Do
not place the product in your mouth. Wash
your hands after handling this product.
©Copyright 2019, Design Toscano, Inc.
1 . 8 0 0 . 5 2 5 . 0 7 3 3
DESIGNTOSCANO.COM
A
B
C
D
E
F
G
Art Nouveau Peacock Tiffany-Style
Stained Glass Table Lamp
Thank you for your recent purchase
of this Design Toscano hand-crafted
sculptural lamp. We have taken
great care to create this piece
especially for you. Please review
these instructions and assemble
this piece with care.
Step 4
Screw the rod (C)
into the lamp base (D).
Step 5
Insert the three light bulbs.
The bulbs must comply with
the wattage label marked.
Bulbs are not provided
(110V, 50 HZ, Max 60W, E26).
E
Step 6
Place the lamp shade
(B) onto the top of
the rod (C).
Step 7
H
Screw the finial (A)
into the rod (C) tightly.
Plug lamp in, turn master
on/off switch on cord and
enjoy the beauty. Three
pull chains allow each
bulb to be turned
on/off individually.
T H A N K YOU
PURCHASE
OR
YOUR
TF-10015