Design Toscano KY-521 Instructions

INSTRUCTIONS
PRODUCT
OR
YOUR
Thank you for your recent purchase of this
Design Toscano hand-crafted piece of sculptural
art. We have taken great care to create this piece
especially for you. Please review these
instructions and assemble this piece with care.
Step 1
Insert the required bulb. The bulb must comply
A
with the wattage label marked. The bulb is not
provided (110V, 50 HZ, Max 60W, E26).
Step 2
Place the harp (A) into the base (B).
Tighten screws to secure harp.
B
Step 3
Place shade (C) onto the top of the harp (A).
Step 4
Screw the finial (D) onto the rod of the harp (A).
Step 5
Plug lamp in, turn on/off switch on cord and enjoy the beauty.
Notes: Shade colors will appear darker and less vibrant when
not illuminated. This stained glass product has been protected
with mineral oil as part of the finishing process. Please use a soft
cloth to remove any excess oil.
Important Safety Instruction: This lamp has a polarized plug
(one blade is wider than the other) as a safety feature to reduce
the risk of electic shock. This plug will fit into a polarized outlet
only one way. If the plug does not fit into the outlet, reverse the
plug. If the plug still does not fit, consult a qualified electrician.
Never use an extension cord unless the plug can be fully
inserted. Do not alter the plug.
Warning: California Residents Proposition 65
This product contains lead, a chemical known to the state
of California to cause cancer and birth defects or other
reproductive harm. Do not place the product in your mouth.
Wash your hands after handling this product.
©Copyright 2019, Design Toscano, Inc.
1 . 8 0 0 . 5 2 5 . 0 7 3 3
DESIGNTOSCANO.COM
Lucina, Goddess of Light Stained Glass Lamp
C
A
T H A N K YOU
PURCHASE
OR
YOUR
KY-521
D
B