Sunco GD BC SR-BK-3070K-6PK Installation Manual

LED SELECTABLE SOLAR
SIDEWALK LIGHT
Installation Manual
COMPONENTS
x2
Light Pole
Please review instructions carefully before proceeding.
NOTE: Ground should be soft enough to easily insert floor plug.
EASY INSTALLATION
1. Insert floor plug into light pole.
• If desired, add more height
by using connector to attach
additional light pole.
WARNING
To reduce the risk of fire, electric shock, or physical injury:
• This product must be installed in accordance with the applicable installation code by a
person familiar with the construction and operation of the product and hazards involved.
• Abide by related regional and local laws or regulations.
• Do not cover the fixture with thermally insulating material.
• Check for shipping damage before installing. If the product is damaged, do not use it.
• Keep fixture away from corrosive substances.
• Suitable for outdoor wet environments ranging from -4°F-104°F.
• Clean the fixture regularly to ensure proper operation. Do not clean with harsh solvents.
• Use safety precautions and abide by regional and local laws or regulations.
• This product is not compatible with dimmers or timing devices.
• This product is not compatible with third party sensors.
• This product is not compatible with occupancy sensors.
x1
Floor Plug
Floor Plug
Cover
Selectable Color
Temperature
2. On main body, cover solar panels
on top of light and select desired
color temperature.
• If light does not turn on when solar
panels are covered, leave in daylight
for 2-3 hours and try again.
x1
Connector
3. Insert light pole into main body.
• Place fully assembled fixture into
desired location.
SPECIFICATIONS
Voltage
Wattage
Battery Capacitance
Housing Material
Moisture Rating
Warranty
Weight
NOTE: Location should have clear
access to sunlight and kept away
from other sources of light that
could interfere with sensor.
4.2V
2W
2000mAh
Polycarbonate
Wet Rated
1 Year
0.79 lbs