Page 5
Left Side Panel Faucet Right Side Panel Strainer Gasket Front Panel Screw Back Panel Strainer Bowl Round Insert Bar Gasket Square Base Bar with connector Double Lip Seal Adjustable Metal Feet Waste Bowl Screw Flat Gasket Hand-Tighten Thumb Screws Fitting Utility Sink P-Trap...
Page 7
5. If you want to connect the faucet with , remove the aerator shell (1), aerator(2) and washer(3) from spray head garden hose by the aerator wrench (5). Then reinstall the washer (3) into the spray head, and thread the connector (4) onto the spray head.
Page 8
washing stand 1.Turn the left panel and right panel side onto protective surface. 6.Gently put the rack upright. 2.Attached the adjustable feet (G) on the left panel(A)and right panel(B). 3.Connect one square base bar (F) with right and left panel with 7.Screw the hand-tighten thumb screws (I) into the holes on the connecters and tighten the screws(H rack and tighten.
Page 9
1. Security the rack into screw hole by black panel(screws are not provided) if needed. 2. Carefully place a bead of sealant around the top of the rack if needed. 3. Ease the sink into the rack, ensuring that it is placed evenly and centered on the rack. 4.
Need help?
Do you have a question about the TFH-2522-MB and is the answer not in the manual?
Questions and answers