Kaytee CritterTrail Activity Assembly Instructions

Parts Identification List: Item #100079225
QTY: 1 Part A Loop-d-Loop Top
QTY: 1 Part B Loop-d-Loop Bottom
QTY: 1 Part C Loop-d-Loop Screw
QTY: 5 Part D Connector Ring
QTY: 1 Part E 3.5" Fun-nel Tube with Support Rings
®
QTY: 1 Part F Fun-nel J Tube
®
QTY: 1 Part G Fun-nel Bubble Plug
®
QTY: 1 Part H Fun-nel Tee
®
QTY: 1 Part I Outhouse Top
QTY: 1 Part J Outhouse Bottom
QTY: 1 Part K Snap-on Comfort Wheel
OUTSIDE HOME INSTRUCTIONS
STEP 1:
Connect the Loop-d-Loop Top (A) to the Loop-d-Loop Bottom (B)
by snapping together.
STEP 2:
Tighted the Loop-d-Loop Screw (C) in place to lock the
Loop-d-Loop Top (A) and Loop-d-Loop Bottom (B) together.
STEP 3:
Next, using a Connector Ring (D) attach the Fun-nel
Bubble Plug (G) to the top of the assembled Loop-d-Loop.
STEP 4:
Using a Connector Ring (D), attach the Fun-nel
assembled Loop-d-Loop.
STEP 5:
Using another Connector Ring (D), attach the 3.5" Fun-nel
with Support Rings (E) to the Fun-nel
STEP 6:
Assemble the Outhouse Top (I) and the Outhouse Bottom (J) by
snapping together. Attach the assembled Outhouse to the side
opening of the Fun-nel Tee (H) with a Connector Ring (D).
®
STEP 7:
Place the assembled top portion through the top access hole of
the home.The CritterTrail
through the CritterTrail habitat by punching out one of the ports
®
in the roof.
NOTE: DO NOT punch out access holes until you are ready to
expand your pet's home. Access holes CANNOT be closed
once opened.
INSIDE HOME INSTRUCTIONS
STEP 8:
Attach a Connector Ring (D) to the Fun-nel
STEP 9:
Place the Fun-nel J Tube (F) through the front door of the
®
home and attach the Fun-nel
3.5" Fun-nel Tube with Support Rings (E).
®
Note: If the Activity is used in a home with shelves, it may be
necessary to move the shelf down so that it does not touch
the Fun-nel J Tube (F).
®
SIDE ACCESSORY INSTRUCTIONS
STEP 10:
Unwrap the pre-assembled Snap-on Comfort Wheel (K) and
attach to any side opening in the home.
NOTE: It may be necessary to disassemble the Snap-on
Comfort Wheel (K) and attach the inner part to the home first.
If this is needed, be sure to brace the side of the home from
the inside during attachment of inner part.
Manufactured by: Kaytee Products, Inc., Chilton, WI 53014 USA
Kaytee with design and Fun-nel are registered trademarks of Kaytee Products, Inc.
Critter Trail is a registered trademark of Pets International Ltd.
For more information on bird and small animal products, visit us at: kaytee.com
®
Tee (H) to the
®
Tube
®
Tee (H).
®
Activity is designed to be attached
®
J Tube (F).
®
J Tube (F) to the end of the
®
®
Our Toll-Free Number (within the USA and Canada only)
Fun-nel Bubble Plug
® (G)
Connector Ring
(D)
Loop-d-Loop Screw
(C)
Loop-d-Loop Top
(A)
Loop-d-Loop Bottom
(B)
Connector Ring
(D)
Fun-nel Tee
(H)
®
Outhouse Top
(I)
Connector Ring
(D)
Outhouse Bottom
(J)
Connector Ring
(D)
3.5" Fun-nel Tube
®
with Support Rings
(E)
Connector Ring
(D)
Fun-nel J Tube
® (F)
Snap-on Comfort Wheel
(K)
©2017 KAYTEE Products, Inc.
is 800-255-4527, Monday - Friday from
8:00 a.m. to 4:00 p.m. (Central Standard Time).