Honeywell Sync Wireless Earmuff Quick Start Manual

Sync Wireless Earmuff Quick Start Guide
®
1
5
4a
4b
2
3
Bluetooth software 4.1, profiles supported:
• HFP 1.6 (Hands Free Profile)
• HSP 1.2 (Headset Profile)
• A2DP 1.2 (Advanced Audio Distribution Profile)
• AVRCP 1.4 (Audio Video Remote Control Profile)
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc.
and any use of such marks by Honeywell Safety Products USA, Inc. is under license. Other
trademarks and trade names are those of their respective owners."
7
LED
1 LED LOGO
FEATURES
6
POWER
2
BUTTON
3 VOLUME CONTROL KNOB
4a PREVIOUS
BUTTON
NEXT
4b
BUTTON
8
PLAY
5
BUTTON
6 AUX (3.5MM) INPUT JACK
7 USB CHARGING PORT
8 BOOM MIC
DESCRIPTION
BLUE: Active Phone Call
GREEN: Paired, Streaming
RED: Connectable (not-paired)
DESCRIPTION
• Power On/Off
• Pairing Mode
• Previous Song
• Rewind (if supported)
• Reject Incoming Call
• Mute/Unmute Mic (during call)
• Next Song
• Fast Forward (if supported)
• Reject Incoming Call
• Mute/Unmute Mic (during call)
• Play / Pause
• Accept/End Call
• Cancel Dialing
• Redial Last Number
for lithium ion battery
• Pivot Flex Boom Microphone
with Windsock
Please charge fully before first use.
QUICK START
• Turn Bluetooth* on (device)
• Hold Power button on earmuff
until LED blinks blue/red (if
earmuff already on, double press
power button until LED blinks)
• Select "Sync Wireless" from
available devices (or "SCAN"
if not listed)
• If device requests a PIN
please use 0000
• LED will turn green once paired
TROUBLESHOOTING TIP:
Bluetooth performance can
be impacted by several factors
including: environmental
surroundings such as walls, other
wireless devices, and distance from
paired device. Make sure no other
Bluetooth devices are in range
while pairing, to ensure no intruder
pairs to the earmuff device.
©2016 Honeywell Safety
Products USA, Inc.