TIMBER RIDGE 844093076388 Owner's Manual

5 Person SUV Tent
14ft x 10ft x 84in/4.26m x 3.04m x 2.13m
Part
Image
A Rain y
B Tent Body
C
Fiberglass Pole
D
Leg Pole
E Door Pole
F Movie Screen
G Carry bag
H Stake bag
I
Pole bag
Steel stake
J
K
Guy rope
Review your parts list above to make sure all parts listed above have been included in your package.
INTRODUCTION
A MESSAGE TO OUR CUSTOMERS:
Thank you for purchasing a quality product manufactured by Timber Ridge. As the world leader in outdoor recreational products, we pride ourselves in
delive ring quality,customer friendlyproducts. As avalued customeryour satisfacionisvervimoortant tous. We welcome your feedback and await your
responses suggestions,and recommendations.Email us via info tr.us@topsunholdings.com or visit our website www.timberridgeproducts.com.
WE ADVISE YOU TO ASSEMBLE THIS PRODUCT AT LEAST ONCE AT HOME BEFORE GOING ON A TRIP. Obtaining a familiarity with the assembly
and disassembly processes will help ensure your satisfaction and ease concerns you may have should you find yourself setting up in the dark or adverse
weather conditions.
GET THE MOST ENJOYMENT FROM YOUR PRODUCT BY READING THIS OWNER'S MANUAL THOROUGHLY; THEN FOLLOW OUR CAMPING
SUGGESTIONS OUTLINED BELOW. NOTE THE SYMBOLS WE USE AND WHY:
CALLS YOUR ATTENTION TO ANY POSSIBLE HAZARDS IN THE USE AND HANDLING OF YOUR PRODUCT.
CALLS YOUR ATTENTION TO PROVEN SUGGESTIONS COLLECTED FROM OUR CAMPING EXPERTISE AND WILL ENHANCE YOUR EXPERIENCE!
IMPORTANT NOTICE: You may compromise the original FIRE RETARDENCY and WATER REPELLENCY protective coatings when you apply
sprays or other chemical treatments to your tent.
This fabric has been factory-treated and is HIGHLY WATER-REPELLANT; however, it is NOT WATERPROOF. All tents can experience seam
leakage during wet weather. If you desire additional moisture protection, use a seam sealing compound ONLY; be sure to follow the
manufacturer's directions. We recommend sealing your tent during your initial setup and prior to each camping season. Seam Sealer
Compounds can be purchased at your local camping products retailer. For more information, please refer to our website,
www.timberridgeproducts.com or contact our Service He presentatves via info tr.us@topsunholdings.com.
FABRIC FIRE
THIS FABRIC IS NOT WATERPROOF! WARNING: KEEP ALL FLAME AND HEAT SOURCES AWAY FROM
Your product's fabric is a synthetic material that has been treated and is THIS PRODUCT FABRIC. THIS FABRIC IS NOT FIREPROOF! It is
not only highly-resistant to the sun's Ultraviolet (UV) light but also highly made with flame resistant fabric, which meets CPAI-84 specifications.
water-repellant in light rain conditions. Insure a successful and enjoyable The fabric may burn if left in continuous contact with any flame source.
camping experience by heeding the following tips: The application of any foreign substance to the fabric may render the
flame-resistant properties ineffective.
• Keep objects from touching the inside, as objects will "draw in"
moisture at the point of contact.
Do NOT ERECT NEAR an open flame. NEVER use any fuel burning,
• "Prep" your product where necessary with a recommended seam
oxygen consuming devices, or any device that produces fumes –
sealing compound – refer to the seam sealing information in DO
including, but not limited to: cooking stoves, lanterns, candles, hibachis,
NOT SPRAY section of this owner's manual.
or heaters – in or around your product. Inhalation of fumes may result
Important: Prolonged exposure to sunlight that causes UV damage in carbon monoxide poisoning, injury and/or death.
and/or the use of non-recommended foreign substances on synthetic
material may damage the fabric properties and IS NOT COVERED BY THE
LIMITED WARRANTY.
CARE & STORAGE
Your product is NOT machine washable. Your product is NOT machine
dryable.
STRUCTURE
One of the easiest ways to damage your product is storing it while wet.
If you must close camp in the rain, follow these guidelines carefully:
OUR RECREATIONAL PRODUCTS ARE CONSTRUCTED USING
CUSTOM SPECIFICATIONS. However, they are not engineered for • As Soon As Possible: Open your product and ensure that every area
extreme weather, climates or environments. Modification, abuse, and of fabric is clean and completely dry before rolling up for storage.
inclement or "surprise" weather conditions may make additional precautions • If necessary, hang product outside or loosely drape over a ladder in
necessary. Here are some tips should you find yourself preparing for
your garage or spare room for a few days, turning it inside and out
adverse conditions: to prevent trapping pockets of water or debris.
• Use a soft brush to wipe away surface dirt.
To clean your product: Hand wash using a mild dishwashing soap and soft
Make sure any guy lines/ropes on your structure are well-secured in
bristle brush, then allow the fabric to completely air dry.
the ground and lines/ropes are sufficiently "taught" between structure and
Don't neglect the frame: Wipe down all parts – steel, plastic, and fiberglass
stake; adjust where needed. Facing periods of heavy winds? Secure tent
- before putting away for next season's use. Salts from ocean air can and
loops and guy lines/ropes with extra stakes if necessary.
do affect damage if not dealt with as quickly as possible.
Storing a wet fabric for as little as 24 hours in warm weather is likely to
cause fabric to mildew. Once mildew sets in, the stains are permanent.
Check the corners of the roof fabric and make sure roofline is properly
Stains cannot be removed without potential harm to the fabric's coatings;
positioned on framing. Use ALL provided methods of securing your fabric
chemicals or cleaning agents used to remove dirt and stains may irrevers-
to its framing: nylon fastener strips, ties, and guy lines/ropes where located.
Storms or steady rains may collect in water pockets on the roofline. Water ibly harm the fabric.
adds weight, and weight weakens the overall structure. Avoid possible
collapse by maintaining a watchful eye and removing any water accumula- Salts, mildew and other causes and subsequent effects are NOT covered
under the limited warranty.
tion that may occur.
TROUBLE SHOOTING GUIDE
PROBLEM
1.CONDENSATION
2.MILDEW
Qty
3. FAULTY ZIPPER
1
1
4. FLOOR
3
CONDENSATION
(ONLY APPLICABLE ON
4
PRODUCTS WITH FLOOR)
1
1
THIS RECREATIONAL ITEM IS NOT INTENDED FOR USE AS A PERMANENT STRUCTURE.
This Tent/Shelter has been developed and is intended to provide protection from
sun and light rain. DO NOT use any gas or flame sources under or near this product.
1
This product is NOT WATERPROOF.
Excess water build-up can cause the frame system to become unstable, and
collapse, causing injury. Any personal accessories or modifications to product
1
should be removed before the onset of inclement weather such as heavy rain, wind,
lightning, hail, snow, etc. This product should be completely dismantled to avoid
1
permanent damage to product components and avoid any possibility of personal
injury. This product is not a toy. This product is not designed for use by children
10
without adult supervision. Under no circumstances should this product be used as a
permanent or temporary storage facility for children's toys, garden tools, personal
4 belongings or similar valuables. Consumer-made modifications for extended use,
i.e. permanently securing to decks and patios and/or Consumer's failure to follow
stated guidelines, will invalidate any WESTFIELD OUTDOOR INC warranty, expressed
or implied.
THIS RECREATIONAL PRODUCT REQUIRES TWO ADULTS TO ASSEMBLE.
*Make sure ground surface is free from debris, i.e.,rocks that could damage flooring,
*Unless otherwise specified all instructions will be given assuming the assembler is facing the front opening of the tent.
*Carefully fold out your poles, using caution to prevent snapping the shock-cording. Make sure each pole segment is "seated" into the next section
before flexing the pole during set-up. Sort POLES by type and length; refer to parts list descriptions.
*Do not drop tent pole bag. Do not bounce tent bag on its end to remove tent . as these actions may damage the shock-cord and /or pole ends.
1、Lay the tent over a flat area, Spread out the tent, Thread the
assembled top fiber pole through the top pole sleeve.
DO NOT SPRAY!
2、Insert the four ends of the top fiber pole into the
plastic connector.(Note the direction of pipe diameter)
3、Insert the four corner irons into the top piece, Then insert the
hoop rod at the bottom of the tent into the other end of the iron
pipe, Hang the G hook.
4、Install the rainfly, Prop up the side eaves with the side door
poles, Hook the 4 elastic tensioners to the wire ring at the
bottom.
NOTICE!
SOLUTION
THIS IS CAUSED BY LOWER TEMPERATURES ON OUTSIDE OF PRODUCT
COMBINED WITH BODY HEAT ON INSIDE OF PRODUCT. WHEN THIS
OCCURS, AVOID TOUCHING WALLS TO REDUCE CONTACT LEAKAGE.
LEAVING DOORS AND WINDOWS OPEN WILL REDUCE CONDENSATION.
TO AVOID MILDEW, NEVER STORE YOUR PRODUCT WET OR DAMP.
HOWEVER, IF MILDEW OCCURS, USE A SOFT BRISTLE BRUSH OR
SPONGE WITH MILD SOAP TO CLEAN. LET THE PRODUCT DRY IN THE
SUNLIGHT AND APPLY SEAM SEALER COMPOUND THE PRODUCT ON
INSIDE SEAMS.
ALL OF OUR TENTS COME WITH SELF-REPAIRING NYLON
COIL ZIPPERS. IF THE ZIPPER SEPARATES, YOU CAN MOVE
THE SLIDER TO THE BEGINNING OF THE ZIPPER TAPE AND
REWORK THE ZIPPER. LOCAL AWNING AND UPHOLSTERY
REPAIR SHOPS MAY BE ABLE TO ASSIST YOU.
TO PREVENT FLOOR CONDENSATION USE A GROUND
CLOTH. PLACING A GROUND CLOTH UNDER YOUR
PRODUCT WILL PROLONG ITS LIFE. GROUND CLOTH SIZE
SHOULD BE SLIGHTLY SMALLER THAN PRODUCT FLOOR SIZE
WARNING
ASSEMBLY INSTRUCTIONS
OWNER'S MANUAL
5、Adjust the position of the tent and fix the pocket cloth
connected with the passage of the car with a loop of ribbon
around the back of the car. Adjust the position of the pocket
cloth to the best condition according to the specific situation.
6、First put the top cover over, and then fix the shorter webbing on the
top cover through the hub of the car, Adjust the webbing, Then the frog
buckle on the long webbing in the middle of the side of the top cover is
fastened to the round male buckle on the short webbing mentioned
above, Adjust the webbing.
7、First attach the two suckers that come with it to the front
windshield(If the car roof is smooth, it can also be fixed on the
roof)Then connect the webbing socket on the suction cup with
the buckle on the top cover, Adjust the webbing to a suitable
tightness.
8、Fix the nail points at the four corners of the tent and the
bottom of the connecting channel, and tighten the wind rope.
Installation guide for projection cloth
1、Take out the projection cloth and hang the end with the plastic adjusting buckle to the hanging point in the corner
of the tent, There are three hanging points to choose from(1、Fabric ring on shoulder opposite side of tent entry 2、
Fabric ring on the left shoulder of tent entry 3、Located on the same side of 1, outside the tent)
2、Put fiber pole on the bottom of the curtain for a better viewing experience
DISASSEMBLY INSTRUCTIONS
* Make sure all doors are zipped nearly closed, leaving space to allow air to escape when repacking.
* Store all poles and stakes in their corresponding bags to prevent possible tearing or damage to fabric.
1、First remove the top cover of the connecting channel, and
then remove the pocket cloth, and finally remove the rainfly.
2、Release the leg pole clips, then pull the top fiber pole out
of the awning pole pockets and place them in the pole bag
with the rainfly poles.
3、Fold the tent in half according to the length of the pole bag, roll
it up and fasten it into the bag with a bandage.
Call toll free 1-877-579-1550 Mon-Fri, 8:30 a.m. to 5:30 p.m. (Eastern Standard Time)