TIMBER RIDGE TRWF141080TU Owner's Manual

MODEL # TRWF141080TU 10 PERSON DOME TENT
14ft x 10ft x 80in / 4.27m x 3.05m x 2.03m
FABRIC BODY
1 Tent Body
1 R
POLES
2 Fiberglass Pole-Main with green color code
1
Fiberglass Pole-Side Eave with dark green color code
2
Fiberglass Pole-Top Ridge
UNIVERSAL PARTS
1 Carrybag
1 Pole Bag
1 Stake Bag
1 Gear Loft
1 Divider Curtain
1 Guy Rope
STAKES
14 Steel Stakes
THIS RE CRE ATIONAL PRODUCT RE QUIRE S TWO PE OPLE TO ASS E MBLE .
Always store tent in the carry bag, do not drag or push tent across rough surfaces
as it will cause extra wear and may punctur
STEP 1: Verify Package Contents
Verify package contents by emptying contents of bag(s) and confirming all
parts are included and undamaged.
Tip: Do this at home before you leave on your trip.
STEP 2: Assembly
1) Spread out the tent at, oor side down.
2) Locate main pole sleeves and insert tent poles (A)so the poles cross at top of
the tent.
2
STEP 3： Assemble Tent
1) With a person holding each end of a main pole(A), ex the pole into an arch. Carefully place
the ends onto the pins located at the stake loops.
2) Repeat this step for the second main tent pole(A).
3) Clip the plastic hooks on the tent to the main pole(A).
4) Insert side eave poles(B)into the pole sleeves.
5) With a person holding each end of a side eave pole(B), ex the pole into an arch. Carefully place
the ends onto the pins located at the stake loops.
6) Repeat this step for the second side eave pole(B).
4
5
STEP 4： Attach rainfly
N/A
1)Insert the top ridge pole(C)into the webbing pocket.
N/A
2)Place the rain y over the tent.Clip the plastic hooks on the tent to the top ridge pole (C).
FPOL-705BK 3)Fasten the velcro to the berglass poles.
4)Adjust the buckle y attachment.
FPOL-518BK
FPOL-268BK
N/A
N/A
N/A
N/A
N/A
GROP-2.5MBW
STS-7IN
STEP 5： Stake the tent
1)Secure tent by using all guy ropes and stakes.
2)Attach gear loft by using the plastic S-hooks to hook into the fabric loops sewn on the inside of
the tent.
Tip: S takes provided are for s olid ground. C amping in s and?
We s ugges t c orks c rew s tyle. C hec k favorite retailer for availability.
en when folded.
A
STEP1：Pull out the stakes and place the stakes into stake bag. Do not pull on
STEP2：Unhook the rain y S-hooks and undo the hook-and loop straps around
STEP3：Unlock the plastic clips and remove the rain y berglass pole from
STEP4：Remove and carefully fold the rest of the berglass poles.
A
STEP5：Fold the tent into a rectangular shape the same width as pole bag, lay
1
B
.
1
c
3
1
the pin-rings or fabric loops as this could cause tearing.
the berglass poles.
grommets and sleeve, remove the rain y.
rain y, pole bag, stake bag and gearloft at one end and roll tightly
together , slowly queezing air out.
3
1
2
4
1