Advertisement
Quick Links
ASSEMBLY INSTRUCTIONS
ZZGC-V1
FTLFCT-6026
COFFEE TABLE
Notice：
1.Follow the installation instructions. Please confirm all accessories are preset before installation.
2.Do not fully tighten the screws during initial assembly.Fully tighten screws only once all pieces
which are correctly assembled.
3.If you encounter any problems during installation, please contact our customer service.
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for YitaHome ZZGC-V1
Summary of Contents for YitaHome ZZGC-V1
- Page 1 ASSEMBLY INSTRUCTIONS ZZGC-V1 FTLFCT-6026 COFFEE TABLE Notice： 1.Follow the installation instructions. Please confirm all accessories are preset before installation. 2.Do not fully tighten the screws during initial assembly.Fully tighten screws only once all pieces which are correctly assembled. 3.If you encounter any problems during installation, please contact our customer service.
- Page 3 ×1 ×2 ×1 ×2 ×2 ×2 ×2 ×2 ×2 ×1 ×2 ×2 ×54 ×42 ×12 ×24 ×2 Ø6×35mm Ø15×12mm Ø15×10mm Ø8×30mm Ø7×47mm ×1 ×16 ×12 ×2 ×2 M4×64mm 3.5×14mm Ø4×35mm L300mm L300mm ×2 ×2 ×2 ×1 ×1 AUTO MODE+ MODE- SPEED+ SPEED- COLOR...
- Page 4 ×1 ×2 ×1 ×2 ×42 ×2 ×2 ×2 ×8 ×2 ×2 CL/CR J(CR) I(CL) I(CL) J(CR) ×2...
- Page 5 ×1 ×1 ×2 ×2 First,insert the D part into the board directly, and then assemble and tighten the B part with a screwidriver. ×1 ×2 ×2 ×1...
- Page 6 ×1 ×10 ×4 Note: The position of the slides on the back is upward. ×1 ×10 ×4 Note: The position of the slides on the back is upward. Note: The position of the slides on the back is upward.
- Page 7 ×1 ×2 ×4 ×2 Note: The holes face inward during installation. ×1 ×4 ×2 Note: The holes face inward during installation.
- Page 8 ×12 ×8 AUTO MODE+ MODE- SPEED+ SPEED- COLOR 2.4G RF ×1 ×1 AUTO MODE+ MODE- SPEED+ SPEED- COLOR 2.4G RF Tear off the tape and apply it to the bottom plate, then press it firmly with your hand. Please remove the plastic film here before using the remote control.
- Page 9 ×2 ×2 ×2 ×2 ×12 ×8 ×2 ×2 ×2 ×4 ×12 ×2...
- Page 10 ×8 ×2 ×2 K(CR) L(DR) G L(DR) ×2 DL/DR J(DL) ×2 L(DR) I(CL) K(CR) Installation Completed...
- Page 11 Pure & Easy...
Need help?
Do you have a question about the ZZGC-V1 and is the answer not in the manual?
Questions and answers