DWT AJ56 Original Instructions Manual

1.5a 15000 opm electric sander with 24pcs sandpapers

Advertisement

AJ56
4007520
Changzhou City Tianhe Tools Co., Ltd
Original instructions
Jiannong Industrial Zone,Yaoguan,Changzhou, Jiangsu

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AJ56 and is the answer not in the manual?

Questions and answers

Summary of Contents for DWT AJ56

  • Page 1 AJ56 4007520 Changzhou City Tianhe Tools Co., Ltd Original instructions Jiannong Industrial Zone,Yaoguan,Changzhou, Jiangsu...
  • Page 2: Technical Characteristics

    TECHNICAL CHARACTERISTICS. Voltage-frequency ......120V~60Hz Amperage ............1.5 A Class ..............II Protection index ........... IP20 Speed rate ........15000 /min Base sizes ......5-1/2" x 5-1/2" x 3" Sandpaper sizes ......140x140x80 mm Orbit diameter ..........2 mm Net weight ..........1.3 kg PICTOGRAMS.
  • Page 3 PERSONAL SAFETY. DO NOT ABUSE THE CORD. Stay alert, watch what you are doing and use Never use the cord to carry, lift or unplug the power common sense when operating a power tool. tool. Keep the cord away from heat, oil, sharp Do not use a power tool while tired or under the edges or moving parts.
  • Page 4: Maintenance

    STORE POWER TOOLS. burns. Some materials worked with may contain Store power tools out of reach of children and chemicals or toxic components. Avoid inhaling not allow the handling of power tools to people these substances or allowing them to come into unfamiliar with the tools or these instructions.
  • Page 5: Operation

    POWER SUPPLY. TO EMPTY DUST COLLECTOR. Make sure the power supply is adapted to the While holding the sander and remove the dust requirements shown on the information panel of the collector cup. Gently shake or tap the dust collector sander (1).
  • Page 6 AJ56 5-1/2" x 5-1/2" x 3" 15000...
  • Page 8 NO. Name Name power plug ang cord ALU fan cord protector bearing 628RS Capacitor right fastener screw wind shield tension disc back bracket connection pole front bracket left housing dust box switch pole base switch dust cover cover screw left fastener base cover carbon brush assenbly wash...
  • Page 9: Service Card

    (due to manufacturing faults) during the service period. How to Return Your DWT Products Contact support@icginter.com with your order number. We will issue you a return label for your return.

Table of Contents