Advertisement
Advertisement
Table of Contents
Related Manuals for UGEE Q8W
Summary of Contents for UGEE Q8W
- Page 1 Bluetooth Graphics Drawing Tablet User Manual...
- Page 2 Contents 01 Product Overview 02 Driver Introduction 03 Specifications 04 Frequently Asked Questions (FAQs)
-
Page 3: Product Overview
01 Product Overview 1.1 Tablet Introduction This product is a pressure sensitive Bluetooth Drawing Tablet, designed for a vari- ety of applications, including drawing, signing, and computer control. To optimize your Drawing Tablet experience, we strongly advise you to read this instruction manual in detail before using the product. - Page 4 1.3 Product ① ② ④ ③ ⑥ ⑤ ① Power key Press and hold for 3 seconds to turn on/off Press and hold for 8 seconds to reset Short press 3 times in a row to bluetooth pair ② Indicator light Red indicator status a.
- Page 5 flashing green). c. Enter the Bluetooth connection interface on the computer/Android phone/tablet and search for the device name“Q8W”and complete the pairing. d .Run the driver, set the parameters and test the product performance (no driver is required for mobile phones/tablet products).
-
Page 6: Driver Introduction
02 Driver Introduction 2.1 Driver Download and Installation 2.1.1 Visit the ugee official website (www.ugee.com) to download the Q8W driver. 2.1.2 Before installation, please ensure all drawing and antivirus software are closed. 2.1.3 Double-click to run the driver, follow the prompts and click "Next" until the installation is completed, then restart the computer. - Page 7 b. Device Connected (Figure 2). Figure 2 2.2.2 Work Area Settings 2.2.2.1 Setting up Multiple Monitors Select the work area to set the correspondence between the movement of the stylus on the drawing tablet and the cursor's movement on the monitor screen. When using a single monitor：the entire work area of the drawing tablet is mapped to the full screen of the monitor by default.
- Page 8 Figure 2: Multi-monitor Duplicate Mode 2.2.2.2 Setting up the work area In the driver settings, you can change the workspace of the stylus by selecting full tablet screen, scaling it to match the screen, or by entering a specific input value. a.
- Page 9 2.2.2.4 Setting and testing pen pressure sensitivity Manually adjust the curve or move the slider on the progress bar to adjust pressure sensitivity. Conduct a pressure test on the right concurrently to achieve optimal pen pressure. To set the pressure sensitivity area, refer to Figure 1. To test the pressure sensitivity area, refer to Figure 2.
- Page 10 2.2.2.6 Enabling Mouse Mode The mouse uses the absolute mode by default. Check it to use the relative mode (you can adjust the cursor speed). Absolute mode (pen): Map the device's work area to the configured display area on the screen. Relative mode (mouse): The operation method of this mode is the same as that of a normal mouse.
- Page 11 2.2.2.7 Importing and exporting configuration files This driver supports exporting and importing your customized configuration data for the product, saving you the trouble of having to repeatedly set up preferences when using different software.
-
Page 12: Specifications
03 Specifications Product Model Work Area 214.8 x 151 mm Dimensions 280*200*22.6 mm Body thickness 10.6mm (excluding the height of the pen slot) Net weight 429g Resolution 5080LPI Report Rate 200RPS Pen Pressure 8192 levels Reading Height 10mm Data Port USB-C WirelessTechnology Bluetooth v5.0... -
Page 13: Frequently Asked Questions (Faqs)
4. No pressure sensitivity in drawing software Please check if the software supports the pressure sensitivity feature. Some mobile apps may not have built-in pressure sensitivity features. If you need any further assistance, please contact us at: Website: www.ugee.com Email: service@ugee.com...
Need help?
Do you have a question about the Q8W and is the answer not in the manual?
Questions and answers