Advertisement
Advertisement
Table of Contents
Related Manuals for NICEDAY CT11PRO
Summary of Contents for NICEDAY CT11PRO
- Page 1 Elliptical Machine User Manual Model: CT11PRO...
-
Page 2: Important Safety Information
Important Safety Information For correctly assemble and safe use, please read all caution carefully. 1. Please read this manual entirely before assembling and using this equipment. Safe use can only be achieved under the premise of proper assembly, maintenance, and use of the equipment. -
Page 3: Part List
Part List 1. Before assembling the product, please check the received accessories according to this list. 2. If any parts are damaged or missing, please kindly contact the seller to get free replacements. Service email: nicedayfitness@outlook.com... -
Page 4: Assembly Steps
Assembly Steps STEP 1: Assemble the front leg tube(with wheels) and the rear leg tube 【Parts required: 18/19/20】 1. Remove the pre-assembled M10*90 bolts(20) from the leg tubes(18)(19). 2. Connect the leg tubes to the mainframe(14) with the M10*90 bolts(20). 3. - Page 5 STEP 3: Locking the vertical tube 【Parts required: 6/17】 1. Locking the vertical tube via the M8*78 Bolt(6) and 5pcs of M8*20 Screws(17). 2. Tighten the bolts and screws with Allen key (23-A) and wrench (23-B). Note: Please tighten all bolts and screws of this position thoroughly. The screw's insufficient tightening will cause squeaking noise during use.
- Page 6 STEP 5: Assemble the pulse handle 【Parts required: 13/8/9】 1. Remove pre-assembled M8*30 screw(8) from top of the vertical tube. 2. Attach the pulse handle(13) to the vertical tube with the M8*30 screw(8). 3. Tighten the screws with Allen key 23-A 4.
- Page 7 STEP 7: Assemble the Screw covers for the handles 【Parts required: 10-L/10-R/11-L/11-R/12/22】 1. Attach the screw covers(10-L)(10-R)(11-L)(11-R) to the connection position of the handles and the rockers. 2. Fix the screw covers with the M5*13 screws(12) and M4*16 screws(22). 3. Tighten the screws with Allen key (23-A). STEP8: Assemble the digital watch 【Parts required: 3/4】...
- Page 8 STEP 9: Assemble the pedals. 【Parts required: 15/16/7】 1. Attach the left and right pedals(15)(16) to the pedal support tube with M8*42 Bolts(7). 2. Tighten the bolts with wrench (23-B). STEP 10: Test the elliptical machine Pedal the elliptical machine for 10 minutes, to confirm if the machine exists the following issues. 1) Strange sounds 2) Jerky movement 3) Digital watch showing issue...
-
Page 9: Exploded View
Exploded view... - Page 10 Digital watch instruction Button's Function MODE: Press to select the different modes, including TIME, SPEED, DISTANCE, CALORY, ODO, and PULSE. Extended press the MODE button will turn all values to 0. SET: To set time, distance, and calories as exercise goals. Setting step: Time as an example.
- Page 11 Other Instructions for The Digital watch 1. ALARM: The watch will "Beep" when press the MODE, SET, and RESET buttons together. 2. AUTO ON/OFF & AUTO START/STOP: The power will turn off automatically if receive no signal for 4 minutes. As long as the rockers are in motion status or press any buttons, the watch will be in working status.
- Page 12 KINOMAP Connection Instructions The IOS mobile phone system must be higher than version 7.1 and must support Bluetooth BLE 4.2 (iPhone 4S or higher). The Android system requires version 4.3 or above, and must support Bluetooth BLE 4.2. 3.1. The wireless transmitter in the device can only record the user's data and send it to the mobile APP when it is connected to the mobile phone.
- Page 13 2.1. Download the APP and register your personal information. 2.2. Turn on the Bluetooth of the mobile phone, and make sure that the transmitter is powered on and in working condition. 2.3. Add exercise equipment. The specific operation is as follows:...
Need help?
Do you have a question about the CT11PRO and is the answer not in the manual?
Questions and answers