Midi Functions; Midi Channel - DigiTech WHAMMY User Manual

MIDI Functions

A new feature found in this incarnation of the Whammy™ is a MIDI input. MIDI messages can
select a Whammy™ Preset with the effect engaged or disengaged, and control the pedal
position.

MIDI Channel

The Whammy™ MIDI channel is used for receiving incoming MIDI data only. The Whammy™
can receive MIDI messages on any, or all MIDI channels. The following steps outline the proce-
dure for accessing or changing the MIDI channel:
1. Disconnect the the power from the Whammy™ pedal.
2. Press and hold the footswitch while reconnecting the power. One of the Preset LEDs will
begin to flash indicating the currently selected MIDI channel.
3. Using the reference chart below, rotate the knob to select the desired MIDI channel.
4. Press the footswitch again to exit the MIDI set up menu.
Omni
Chnl 16
Chnl 15
Chnl 14
Chnl 13
Chnl 12
Chnl 11
Chnl 10
Chnl 9
User's Guide
Chnl 1
Chnl 2
Chnl 3
Chnl 4
Chnl 5
Chnl 6
Chnl 7
Chnl 8