DeLUX M618Mini DB-Grey User Manual

Contents
Button Function
Features
- Vertical mouse with ergo snail bionic structure,
reducing hands pain
- Dual Connection-2.4G wireless with USB
receiver & Bluetooth 3.0/5.0
Set Up the Connection
There are two ways you can connect your mouse.
Firstly, make sure the ON/OFF button
(on the mouse bottom) is located in ON side and
check which mode the mouse is in (press the mode
switch, if the side light blink with green light,
which mean it is in 2.4 wireless mode,
if with blue/red light, that is Bluetooth mode).
Via 2.4G USB wireless(press the mode switch,
the side light blink with green light).
Normally just plug and play, your devices will
detect the mouse automatically.
Via Bluetooth
light blink with blue/red light ).
*Please note that there are two bluetooth channel
(side blink with blue light for channel 1,
red for channel 2).
- Make sure the mode switch is in Bluetooth mode.
- Keep pressing the mode switch button for about 2s,
then you could find the side light blink with blue
(or red) light.
- Then open the bluetooth setting on your devices
to complete the pairing.
- Search for the new devices and click on BT3.0
Mouse/BT5.0 Mouse to connect.
Rebulid the 2.4G wireless
connection
- If you cannot build the connection after pluging
the USB to your devices, the situation of the sensor
(in the mouse middle bottom) light lighting up for
a while and then turning off automatically will be
seen, please follow the below guidance to rebuild
the connection.
1) Slide the ON/OFF to the ON side and make sure
the mouse is in the mode of 2.4 wireless(side light
blinking with green light)
2) Then pressing the left, scroll wheel and right
button at the same time for about 3 seconds and
you will find the side light keeps blinking rapidly.
3) Plug the USB receiver to your devices in 20
seconds. Then the connection will be bulit
automatically.
Debugging Tips
·Check the receiver if is connected to the USB port.
·Check the ON/OFF button if in ON mode.
·Check the effective distance between mouse
thereceiver and shorten it.
·Rebuild up the connection between the mouse
and receiver.
Caution
·Risk of explosion if battery is replaced by an
incorrect type.
·Dispose of used batteries incorrect type.
·Dispose of used batteries according to the
instructions.
(press the mode switch, the side