Download Print this page

CableCreation CD0660 How-To

Usb c to ethernet adapter work for ns

Download this manual

How to install CD0660's driver correctly

macOS

1. Please download the correct driver via the Divers link:

https://www.asix.com.tw/download.php?sub=driverdetail&PItemID=131

2. Run "AX88179_178A.dmg" file

3, Then you would the following popping message. Click "OK"

4, You would get the following notification. Then Open "Security Preferences".

5, Then you should allow the driver to be installed. Click "Allow".

Need help?

Do you have a question about the CD0660 and is the answer not in the manual?

Page 1 How to install CD0660’s driver correctly macOS 1. Please download the correct driver via the Divers link: https://www.asix.com.tw/download.php?sub=driverdetail&PItemID=131 2. Run “AX88179_178A.dmg” file 3, Then you would the following popping message. Click ”OK” 4, You would get the following notification. Then Open “Security Preferences”.
Page 2 6, Then you would see the following condition. Then restart your Mac. 7, After restarting your Mac, if you can see green marked icon over Apple iconSystem PreferencesNetwork” AX8817...thernet” , that showing that the adapter can work.
Page 3 DHCP server, IP address, subnet mask, default gateway, DNS server, etc. Windows 1, Connect CD0660 to your PC’s USBC Port with Ethernet cable. 2, Download the correct driver. https://www.asix.com.tw/download.php?sub=driverdetail&PItemID=131 3, Install the driver.
Page 4 If you also could not surf the Internet, you probably need to contact with your network carrier or your router supplier for more settings including DHCP, IP address, Subnet Mask, Default Gateway, DNS server. support@cablecreation.com For more questions, email to us...