Set Up Windows Audio And Midi (Optional) - DigiTech RP500 Software Installation Manual

4. Click the "RP500 Drivers" button and follow the onscreen instructions to install
the necessary drivers for using X-Edit and Cubase.
5. Click the "X-Edit" button and follow the onscreen instructions to install the
X-Edit Editor/Librarian software. During the X-Edit installation, you may be
prompted to install Microsoft .NET 2.0 which is required to use the X-Edit
application. Agree to the terms and follow the onscreen instructions to install
.NET 2.0. Once the .NET installation is complete, continue with the X-Edit
installation.
6. Click the "Cubase LE 4" button and follow the onscreen instructions to install
Cubase. During the Cubase installation you may be prompted to install the
Syncrosoft License Control software. This is a license management application
that is used once you register Cubase at the Steinberg website. Agree to the
terms and follow the onscreen instructions to complete the Syncrosoft installa-
tion.
7. If you don't have Adobe
Reader" button and follow the onscreen instructions to install Adobe Reader.
You will be taken to Adobe's website, where you can select and install the
appropriate version of Acrobat Reader for your computer. Adobe Reader must
be installed to view the Cubase LE 4 documentation.
. Once installation is completed, continue to Section B - Setup Windows
Audio and MIDI to configure the newly installed software.
Note: When Cubase
demo mode for 30 days. Before the 30 day trial expires you will need to regis-
ter online at Steinberg's website to receive an unlimited use license. Click the
"Register Now" button to visit the Cubase LE 4 website and follow the instruc-
tions there to register Cubase LE 4 and receive an activation key. When the
activation key is received via email, follow the instructions included in the email
to download and install it and enable unlimited use of LE 4.
b. seT up WinDoWs
When the USB Audio and MIDI drivers were installed, Windows may have automatically
selected them as your default audio and MIDI outputs. This means that your Windows
sounds will be sent to the RP500 rather than your computer's sound card. We need to
check if these have been changed and return the settings to what they were before.
1. Select Start>Control Panel>Sounds and Audio Devices (XP) or
Hardware and Sound (Vista).
Select the Audio tab (XP) or Manage Audio Devices (Vista).
2.
3. Under Sound Playback>Default device (XP), or Playback (Vista), make
sure your computer's sound card is selected as the default device.
Under Sound Recording>Default device (XP), or Recording (Vista), make
4.
sure your computer's sound card is selected as the default device.
Under MIDI Music Playback>Default device, open the pull-down menu and
5.
make sure Microsoft GS Wavetable Synth is selected as the default device (XP
only).
2
Reader installed on your computer, click the "Adobe
® ®
LE 4 is first launched, it will be running in fully functional
®
auDio anD miDi (opTional)
®