Geevon T230755 User Manual

FJ755 User Manuals
front size:290x210mm
GEEVON SHOWER CLOCK WITH LED INDICATOR
USER MANUAL
MODEL：T230755
FEATURES:
• Indoor humidity comfort indicator
• Temperature detection range: - 10~+50 °C (14~122 °F)
• Humidity detection range: 20%~95%
• Countdown mode, maximum time 99 minutes with LED light
• Power supply:
Battery: 1.5V AAA battery*2
LCD SCREEN DISPLAY:
Time
1.
Date
2.
Temperature
3.
Indoor humidity comfort indicator
4.
LED alert light
5.
1/10 min countdown touch key
6.
Humidity
7.
Time
8.
Battery compartment cover
9.
back size:290x210mm
TEMPERATURE SETTING
•
Press button in the battery compartment to switch the temperature unit from C to F.
• Temperature detection range: - 10~+50 °C (14~122 °F).
• When the temperature is LOWER than - 10 °Cor 14 °F, it will display LL.L.
• When the temperature is HIGHER than 50 °C or 122 °F, it will display HH . H.
• For the initialization process - Indoor Temperature will display accurately within 3-8 minutes
automatically after setup.
HUMIDITY SETTING
• Hygrometer measures in RH Relative Humidity.
•
Hygrometer Humidity range 20% to 95%
•
when the humidity is lower than 20% , it will display LL.
•
when the humidity is higher than 95% , it will display HH.
•
For the initialization process - Indoor Humidity will display accurately within 3 - 8 minutes
automatically after setup.
Instructions for indoor humidity comfort indicators
Indoor Comfort:
Humidity range:
1%~19%
Indoor Comfort:
Humidity range:
30%~39%
Indoor Comfort:
Humidity range:
50%~59%
Indoor Comfort:
Humidity range:
71%~79%
Indoor Comfort:
Humidity range:
>90%
Bracket
10.
SET, up and down Key
11.
:SET
INITIAL OPERATION
•
Open Production battery compartment cover
• Insert 2 x AAA batteries observing polarity【 "+" and " –" marks】
TIME SETTING
• Press and hold the"
setting item will flash. Press the"
• Press the "
of setting items is as follows:
Year → month → day → hour → minute
• When adjusting the value, press and hold the "
•
Press"
the normal mode.
F.Y.I.:
• If there is no valid operation within 15 seconds, it will automatically return to normal time mode
from the set mode.
COUNTDOWN SETTING
•
Countdown can be set from 1 to 99 minutes
•
Press the "
"
• After the countdown is set for 3 seconds, it will start automatically, and the buzzer BI will sound
once when starting
• After the countdown time is set, the time display will turn to the following
• Timer alarm time 1 minute
• Press the "
LOW BATTERY INDICATION
Low battery indication will appear on LCD screen when battery power is LOWER than 2.75V.
Please install the new battery as soon as possible.
MOUNTING METHODS
The clock Timer can be positioned in 3 ways (PREFERRED Mounting Methods - STAND and HOLE
A. STAND , Table or shelf - pull out the table stand bracket from the bottom rear of the clock.
place on bench , table or desk as desired .
B. HOLE for wall Mounting
C. SUCTION CUP - STRONG DUAL LAYER SUCTION for USE ONLY On Glass, window, Mirror, Granite ,
stainless steel (and any NON-POROUS surface with glossy finish) .
Please be aware that there are certain TILES that are NOT EFFECTIVE With SUCTION CUP method.
This is due to the COMPOSITION Of the TILES. Only some ceramic Tiles are suitable.
Please try to AVOID Using SUCTION Cup method on TILES!
lf using TILES, you must TEST suction by placing slightly above a vanity bench to see if the ties are
appropriate for the suction cup to hold. It is a good idea to test suction for up to 1week.
Therefore , if the tiles are not appropriate for the suction cup method , then the clock Timer will
only fall slightly onto the vanity bench.
20%-29%
The suction cup is very effective but can be temperamental if not applied properly. The suction
power relies on draining air out of the cup , So the surface MUST NOT be concave-convex OR
have any holes , liquid or anything else!
40%~49% PROTECTIVE FILM COVER
Removed simply peel the protective Film cover away from the from the edges of the clock face to
reveal a CRYSTAL CLEAR SPARKLY POLSHED Screen look.
60%~70%
TECHNICAL SUPPORT
Geevon provides 1-year limited warranty on this product against manufacturing
defects in materials and workmanship. If you have any question, please kindly
contact us from your buying channel.
80%~89%
:UP :DOWN
"key for more than 2 seconds to enter the time setting mode. The
"or " " key to select the value of the setting item
" button to confirm the item has been set and go to the next one, the sequence
" or "
" button to confirm the last item to end the setting procedures, then it will return to
" key to step for 1 minute, and press and hold for continuous increase; Press the
" key to step for 10 minutes, and press and hold for continuous increase
" key to clear
" button to adjust quickly.