Key: MODE, SET, UP/SNOOZE, DOWN/12/24H
A.MODE:
Press to switch the display of time and alarm clock: Display:Time→AL1→AL2
1. Under time display, hold down for 3 seconds to enter the time setting mode, and
the setting item blinks: Hour→ Min → Exit
2. Under alarm display, hold down for 3 seconds to enter the setting mode of the
alarm clock time, and the setting item blinks: Hour→ Min → Exit
B.
AL/SNOOZE/UP:(
)
1. During the setting process, short press to adjust, and long press to adjust quickly.
2. When the alarm clock is displayed, press this key to close/turn on the alarm clock
symbol in the following sequence: AL1 on →AL2 on →AL1 and AL2 on.
3. Under alarm noise, press this key to enter the 5-minute snooze and press any key
again to exit the snooze
C.
DOWN/12/24H/KEY:(
)
1. During the setting process, press this key to adjust, and hold down to adjust quickly
2. Under time display, press the DOWN key to switch to 12/24H
In the non-setting state, hold down the Down key and Lock will appear. If any
3.
operation is locked, when unlock appear we can set the operation.
D. Alarm and Snooze:
1. Short press the UP key to enter the snooze (unlimited times) and press any other
key (on the vibrator) to exit the snooze.
2. The alarm symbol blinks when the alarm is ringing, and the "ZZ" symbol blinks when
the snooze is working .
3. The alarm lasts for 2 minutes and stops after 2 minutes
key: Press this key to switch the alarm mode in the following sequence:
1: Mute (screen flash alert) keytone is also off in this mode
2: vibration is weak,
3: strong vibration,
4. strong vibration +BIBI noise
Key tone/Mute switch
1.Press to stay in gear 1, all the key Settings will be silent.
2.Press to stay in any other file, and there will be key tone when setting.
Need help?
Do you have a question about the 785957429479 and is the answer not in the manual?
Questions and answers