Geevon GN-23145T-US Troubleshooting Steps

Check to see if the WWVB icon appears on the atomic alarm clock. If not, the atomic alarm

clock has not received a WWVB time signal in the past 24 hours.
Reposition the atomic alarm clock with the front or back facing Colorado.

Check that the Time Zone selected correctly reflects your location. Adjust the time zone in

the Program Menu.
Check that the DST indicator is correct for your location (most areas observe DST so this

should be ON). Adjust the DST indicator in the Program Menu.
Large buildings, metal-roofed buildings, and buildings or rooms full of electrical and/or radio

equipment make it difficult to receive the WWVB time signal.
The LCD backlight will momentarily turn off while the clock searches for the atomic signal.

The alarm clock will start searching at UTC 7:00, 8:00, 9:00, 10:00, and 11:00.；
If there is no WWVB reception, the alarm clock will search the WWVB time signal every 2

hours until the WWVB time is received.
After the reception, this alarm clock will only search for the atomic signal after midnight.

TROUBLESHOOTING STEPS