ANCEL S200 User Manual

Automotive Diagnostic Smoke Leak Detector
User Manual
Thanks for purchase this product, this user manual shall be carefully read before first time use of
the product.
Always keep this manual handy since it contains important information about using the product.
Warning
Scope of use
Operator shall have basic knowledge about structure of vehicle and the
engine. Vehicle service book is required.
To ensure better test result, it's required there's no wind in the operating
area.
Do NOT use the product on smoke sensitive component. Eg. Smoke
residual might reduce sharpness of head lights if apply to head light
housing.
ONLY low density mineral oil based fluid is allowed to
use as smoke oil. Johnson&johnson's baby oil(pink
label) is compatible. Use funnel to avoid spread the oil
to other parts of the unit.
Check oil level before use, if oil level is lower than the middle of the
gauge, the unit would need a refill, but do not overfill the unit beyond
the gauge.
The product is only allowed to use while ignition's off.
Be sure to use 12V vehible battery, and the battery shall be full charged
and voltage not lower than 12V.
Use bright light torch/ halogen light to help find the leaks.
Wear goggles if available.