Page 5
Make sure the pins are installed correctly as shown with the"check mark" below Below shows how the pins are used to assemble the panels together.
Page 9
Screws and rails should be driven down straight. Any deviation may result in uneven drawer installation. Screws and rails should be driven down straight. Any deviation may result in uneven drawer installation. turn over 180° Left Right...
Page 17
Loosen 40% of the screws Loosen 40% of the screws For uneven drawers: Remove uneven drawers and loosen screws on CL/CR rails. Adjust CL/CR rails slightly up, down, forward, or backward. Then tighten the screws to level the drawer. -15-...
Need help?
Do you have a question about the QZMBJJ-V2 and is the answer not in the manual?
Questions and answers