Page 1
Undermount Fireclay Sink The manufacturer recommends that Fireclay sinks should be installed by a profeessional experienced installer. The manufacturer The manufacturer recommends that the sink counertop cutout provide a 1/8” overhang into the sink bowl opening. However it is strongly recommended to understand and agree to the consumer’s requirement and desired finished appearance before you start the process.
Page 2
Countertop Silicone Caulk (Not Furnished) 1/8” Overhang Recommended Underlayment Sink Set the sink into place and then level the sink with the Cabinet top of the cabinet Apply sealant near the inside edge. Apron-front fireclay sinks the manufacturer the manufacturer The manufacturer the manufacturer for...
Need help?
Do you have a question about the PTB-1919 WH and is the answer not in the manual?
Questions and answers