PEMENOL ZK-J06 Manual

ZK-J06 Trigger Cycle Timer Delay Controller
1.Description:
ZK-J06 is a multifunction delay controller module.Digital tube display.It can be
widely used at Smart home, Industrial control, Automatic irrigation, Indoor ventilation.
And protection equipment.
2.Features:
1>.Digital tube display
2>.Support high level trigger
3>.Emergency stop function
4>.Sleep mode,Wake up with any button
5>.Automatically save parameters
6>.Dual MOS control support more than 15A 400W
7>.Support reverse connection protection
8>.Continuously adjustable from 0.01 seconds to 9999 minutes
9>.Optocoupler isolation to enhance anti-interference ability
3.Parameters :
1>.Product Name:ZK-J06 Delay Controller Module
2>.Product Number:ZK-J06
3>.Working Voltage:DC 5V-36V
4>.Control Current:30A(Max and need heat sink!Normal temperature 15A 400W)
5>.Quiescent Current:15mA
6>.Working Current:50mA
7>.Trigger signal source: High level trigger (3.0V~24V)
8>.Reverse protection:Yes
9>.Size:60*39*14mm
4.Work Mode:
P1.1:Trigger Delay Mode. Input trigger signal and then output turn ON and keep
time OP. Then turn OFF after delay time OP.Keep OFF at last; The input signal is
invalid if get trigger signal again during delay time
P1.2:Trigger Delay Mode. Input trigger signal and then output turn ON and keep
time OP. Then turn OFF after delay time OP.Keep OFF at last; Output will restart
delay if get trigger signal again during delay time
P1.3:Trigger Delay Mode. Input trigger signal and then output turn ON and keep
time OP. Then turn OFF after delay time OP.Keep OFF at last; Output will reset and
ZK-J06 Trigger Cycle Timer Delay Controller
OP.(Time OP can not be set
OP.(Time OP can not be set
0)
0)