DigiTech BP80 Owner's Manual page 21

setting creates a volume pedal effect automatically with varying attack times. Different bass
guitars and pickups require different threshold settings. Choose a setting that fully mutes
the sound when you are not playing.
Of. G1-G9 - Selects the Silencer™ Noise Gate. Settings 1-9 select the threshold. Of turns
the gate effect off.
s1-s9 - Selects the Auto Swell volume swell effect. Settings 1-9 select the attack time.
Chorus/Mod
The Chorus/Mod module is a multi-function module that lets you select the following
effects: Chorus, Flanger, Phaser,Vibrato, SynthTalk™, Octavider, Envelope, Detune, Pitch Shift,
and Whammy™ effects. When the Chorus/Mod module is selected, the Value buttons are
used to choose the type of effect. Only one of the effects in this row can be used at a time.
The following list describes each effect and their parameters in more detail.
C1-C9
Chorus (
A Chorus adds a short delay to your signal. The delayed signal is modulated in and out
of tune and then mixed back with the original signal to create a thicker sound, and
stereo image. Use the Value buttons to select one of the nine Chorus settings.
F1-f9
Flange (
A Flanger uses the same principle as a Chorus but uses a shorter delay time and adds
regeneration (or repeats) to the modulating delay. This results in an exaggerated up
and down sweeping motion to the effect. Use the Value buttons to select one of the
nine Flanger settings.
)
)
17