Rawlings ALL-PURPOSE PRACTICE NET Assembly Instructions

STEP 2:
STEP 1:
Remove all
logo (located in the center of the arch) should be facing up on
contents from box and
center of the net. The Rawlings logo indicates the top section of
check to have all parts of
the Rawlings All-Purpose Practice Net.
the Rawlings All-Purpose
Practice Net. All parts
include 1 net, 1 nylon strap
with 2 L brackets connect-
ed on each end, 2 stability
poles, 3 metal stakes and
carry bag.
STEP 4:
Take one of the L brackets on the end of the nylon strap
and insert the ends of the stability poles. Note: the nylon strap should
lay flush on the ground, so make sure to insert the top section stability
pole in the L bracket hole that is opposite side of where the nylon
strap is connected to the L bracket.
Unfold the net to make an arch shape. The Rawlings
STEP 6 (Optional):
To add extra stability to the net, insert stakes into the ground behind the L brackets
STEP 3:
Connect both sets of the stability poles. Feed the stability poles through each red
sleeve until there is an even length of the stability poles on each end. The net will make an
oval shape with stability poles inserted through the two red sleeves.
STEP 5:
While lifting up the top section of the net, pull the nylon
strap to raise the net into its set position. Then fasten the other L
bracket to the two stability poles on the opposite end. Refer back to
Step 4 on fastening L bracket to the stability poles.