Page 3
Step 2:Use Nut③ and Srew② to connect two Part C and tighten them. Then put one Part J on the bottom side of the two attached Part C. Step 1:Put two Part C together and put one Part A in the middle of Use Screw①...
Page 4
Step 5:Insert Part G to the middle part of the two attached part C. The other three Part G should be done as this.Then insert the other Step 6:Put the canopy fabric (Part P&Q) on the frame,extend it fully. head of Part E to Part L.Finally,Insert Part M(the steel hook) to the Put the heads of tubes(Part K) into the corner pocket of canopy fabric.
Need help?
Do you have a question about the DP Gazebo26 and is the answer not in the manual?
Questions and answers