welland HW950-984 Manual

Package Content
Wood slab x 1
INSTRUCTION
Turn your table top upside-down on
a scratch free surface.
1.
Attach the legs with the screws provided. Please
note that the screws provided are the proper
length for 1.5" to 2" thick.
3.
Metal leg x 4
Please install according to the instruction. Welland LLC and its affiliates are
not responsible for injury or damage resulting from improper installation or use.
Email us at customerservice@wellandllc.com
Screw x 16
Line up one leg at a time to the holes or
marked lines.
2.
Flip your completed table over and enjoy!
4.
Tools Needed
Screwdriver