Advertisement
Quick Links
To achieve the desired loading weight, you are strongly recommended to install the shelf on the wall studs.
This newly, innovated hanging bracket allows the maximum possibilit
This newly, innovated hanging bracket allows the maximum possibility to hang the shelf on the studs. See the back on how to find a stud.
Tools Needed
Tools Needed
Level
Pencil
Electric Drill
STEP 1
Electric Drill
Find the spot where you desire to hang the shelf
and draw a mark along the bottom of the shelf on
the wall.
To achieve the desired loading weight, you are strongl
Easy To Follow Instructions
Hammer
Stud Finder Optional
Screwdriver
STEP 2
Level
Pencil
Locate the studs and mark the centers. Electronic stud
finders are the go-to tool for this task. See the back on
how to find a stud.
Easy To Follow
!If you are hanging your shelf on
amasonry or plaster wall you will
need anchors for your particular
wall material.
STEP 3
Make sure arrow on the back of bracket is pointed up!!!
Hammer
Screwdriver
Place the bracket on the desired spot, with the arrow
pointing up, level it, and mark the holes. Line up the
holes with studs by slightly moving the bracket to the
left or right if possible.
Package Content
10" Shelf
15"-48" Shelf
Drywall Anchors
4
Screws
6
Shelf Board
1
Metal Hanging Bracket
1
STEP 4
In case the holes don't hit
the studs, you will need to
use the drywall anchors.
Stud Finder Optional
Remove the bracket, tap
the anchors into the
marked holes with a
hammer. Use a power drill
or a Philips screwdriver to
drive the anchors in until
they flush with the wall.
60" Shelf
6
8
8
11
1
1
1
1
Advertisement
Summary of Contents for welland WSV118-240 Black
- Page 1 Easy To Follow To achieve the desired loading weight, you are strongl Easy To Follow Instructions To achieve the desired loading weight, you are strongly recommended to install the shelf on the wall studs. This newly, innovated hanging bracket allows the maximum possibilit This newly, innovated hanging bracket allows the maximum possibility to hang the shelf on the studs.
- Page 2 Tools Needed Package Content 10" Shelf 15"-48" Shelf 60" Shelf Drywall Anchors Screws Shelf Board !If you are hanging your shelf on amasonry or plaster wall you will Hammer Stud Finder Optional Level Pencil Screwdriver Electric Drill need anchors for your particular Metal Hanging Bracket wall material.
- Page 3 STEP 3 STEP 1 STEP 2 STEP 4 In case the holes don’t hit Make sure arrow on the back of bracket is pointed up!!! the studs, you will need to use the drywall anchors. Remove the bracket, tap the anchors into the marked holes with a hammer.
- Page 4 and draw a mark along the bottom of the shelf on finders are the go-to tool for this task. See the back on holes with studs by s the wall. how to find a stud. left or right if possibl STEP 6 STEP 6 STEP 5...
- Page 5 How to Find a Stud We highly recommend putting at least one sc We highly recommend putting at least one screw in a wall stud, Whenever possible for maximum support. 1.Using a Stud Finder. 2.Finding Studs in Drywall Without a Stud Finder (2) Try the knock test.
- Page 6 2.Finding Studs in Drywall Without a Stud Finder (1) Check the trim. Any kind of interior trim such as baseboard or crown molding is attached to studs. You can find where the studs are by looking for small dimples in the trim. These indentations are where the trim was nailed to the stud.
- Page 7 (2) Try the knock test. This requires you to knock lightly on the wall to see if you can hear whether a stud has been added. An area with no stud will produce a low, hollow sound. An area with a stud will produce a higher, more solid sound.
Need help?
Do you have a question about the WSV118-240 Black and is the answer not in the manual?
Questions and answers