Rampage Products IS-5307 Installation Instructions

76-83 Jeep CJ5
76-86 Jeep CJ7
81-86 Jeep Scrambler
97-06 Jeep Wrangler TJ
Step # 1
Remove taillight lens, 4 screws
remove Bulbs, (note there are two
different bulbs) and Center Divider;
it is not necessary to remove the
housing from the vehicle.
Step # 2
Insert new reflector, line up tabs
on both sides of housing,
reflector may be snug, but will
slide in tightly.
Step # 3
Install bulbs and the new
lens You're done, Enjoy
your new look.
Installation Instructions
Diamond Brite Taillight Kit
Rampage Products Buford, GA
Phone: 800-328-2409
www.rampageproducts.com
IS-5307