SAUTVS ZP-YJ-031003-0061 Manual

Cargo Bed Enclosure For Kawasaki Teryx KRX 1000
ZP-YJ-031003-0061
BEFORE YOU BEGIN
Read these instructions and check to be sure all parts and tools are accounted. Please retain these
installation instructions for future reference.
This STEEL CARGO BED ENCLOSURE is exclusively designed for your vehicle. Please read the
installation instructions thoroughly before beginning. Installation is easier if the vehicle is clean and
free of debris.
INSTALLATION INSTRUCTIONS
Note: Shift vehicle transmission into "PARK".
Turn key to "OFF" position and remove from
vehicle.
Product and accessories picture:
1. Assemble the
enclosure together with screws.Don't tighten
the screws yet.As the picture shows:
separated cargo
2. According to the marked position in the
picture, remove the hardwares and tie downs
from the cage for backup. As the picture shows:
3. Install the bed enclosure to the position
shown in the figure.First, fix the two screws on
the vehicle frame and then fix the two screws
on the tie downs.Finally tighten all screws.As
bed
the picture shows:
2. Installation is complete!