SAUTVS ZP-YJ-031010-001 Manual

Fender Flares Kit For Kawasaki Teryx KRX 1000
ZP-YJ-031010-001
BEFORE YOU BEGIN
Read these instructions and check to be sure all parts and tools are accounted. Please retain these
installation instructions for future reference.
IMPORTANT
This FENDER FLARES KIT is exclusively designed for your vehicle. Please read the installation
instructions thoroughly before beginning. Installation is easier if the vehicle is clean and free of
debris.
INSTALLATION INSTRUCTIONS
Shift vehicle transmission into "PARK". Turn
key to "OFF" position and remove from vehicle.
FRONT FENDER FLARE
1. Firstly, use the screws to assemble the split
fender flares.
2. Remove the mounting screws of the original
fender flares and install the widened fender
flares directly on the original fender flares.
(The other side can be installed in the same
way)
Notes:
P1: Fixing holes use the original vehicle's nylon
expansion screws
P2-P5: Fixing holes use the screws and nuts
(M6 * 30) provided with the product
P6-P8: Fixing holes use the self-tapping screws
in this product kit