Table of Contents
Advertisement
Model 120000
Power Built 825/850/875/900 Series
Intek I/C
I/C
Model 150000
Power Built 1100/1125 Series
BRIGGSandSTRATTON.com
825/850/875/900 Series
825/850/875 Series
ECopyright Briggs & Stratton Corporation
Milwaukee, Wisconsin 53201 U.S.A.
Operator's Manual
Model 200000
Model 210000
Power Built 1350/1450 Series
Intek I/C
1350/1450 Series
I/C
1450 Series
Power Built 1500/1575 Series
Intek I/C
1500/1575 Series
Form No. 277040-3/07
Printed in U.S.A.
Advertisement
Table of Contents
Related Manuals for Briggs & Stratton J1940
Summarization of Contents
Safety
Symbols and Warning Signals
Explains the use of safety alert symbols and signal words to identify hazards and potential injury severity.
Operational Safety Hazards
Covers risks associated with flammable fuels, carbon monoxide, kickback, and rotating parts.
Thermal and Electrical Safety
Details hazards from hot engine parts and the risks of unintentional sparking.
Features
Engine Component Identification
Labels and identifies key parts of the engine for user reference.
Operation
Oil Management Procedures
Covers engine oil capacity, recommendations, and steps for checking and adding oil.
Fuel Recommendations and High Altitude Use
Provides guidance on suitable gasoline types and adjustments for high altitude operation.
Engine Starting Procedures
Step-by-step instructions for safely starting the engine using rewind or electric start.
Engine Stopping Procedures
Instructions for safely shutting down the engine using throttle control or ON/OFF switch.
Maintenance
Maintenance Schedule and Overview
Presents a chart detailing required maintenance tasks and their recommended intervals.
Emissions Control and Spark Arrester Inspection
Guidance on emissions system maintenance and inspecting the muffler and spark arrester.
Key Tune-Up Components
Procedures for carburetor adjustment, valve clearance checks, and spark plug service.
Engine Oil Change Process
Detailed steps for draining old oil and filling with new oil for different engine configurations.
Air Filter System Servicing
Instructions for cleaning and replacing air filter cartridges and pre-cleaners.
Gear Reduction Oil and Fuel Filter Maintenance
Procedures for changing gear reduction oil and replacing the fuel filter.
Cooling System Care and Storage
Advice on cleaning the air cooling system and preparing the engine for storage.
Troubleshooting
Diagnosing and Resolving Engine Issues
A guide to identifying common engine problems and their corresponding corrective actions.
Specifications
Engine and Tune-up Specifications
Technical details including engine displacement, bore, stroke, and tune-up parameters.
General Engine Information and Ratings
Includes engine type, certifications, and information on gross power ratings.
Warranties
Limited Warranty and Owner Obligations
Outlines the scope of the limited warranty, its terms, and customer responsibilities.
Emissions Control System Warranty
Specifics on the emissions control system warranty, covered parts, and exclusions.
Emissions Durability Period and Labeling
Explains the meaning of emissions durability periods and how to find this information on the engine label.
Need help?
Do you have a question about the J1940 and is the answer not in the manual?
Questions and answers