Kensington K72425AM Pairing Manual

Wireless Presenter
with 2.4GHz Dongle
PAIRING GUIDE
1. Turn power switch to "OFF" position.
2. Press and hold the Black Screen Button,
at the same time, turn the power switch
to the "ON" position, continue to hold the
Black Screen Button for three seconds.
3. The red LED light will flash three times
then turn off, the presenter is now in
pairing mode.
4. Remove 2.4 GHz dongle from presenter
5. Insert the dongle into an available USB-A
port on the host computer.
a. It is recommended to position
the presenter no further than 8 inches
(20cm) from the receiver.
6. After 5 seconds press any button. If button
is functional, the pairing was successful.
Kensington® is a trademark of ACCO Brands. All other registered and unregistered
trademarks are the property of their respective owners. © 2023 Kensington
Computer Products Group, a division of ACCO Brands. k23-4185
1
3
5
a
8 inches
(<20cm)
2
Power
Switch
Black
Screen
Button
4
6