NKCELL POWER RED SPARE TIRE BRAKE LIGHT COMPATIBLE
WITH Bronco 2021 2022 2023 -Present 2 Door or 4 Door
RIASDY SPARE TIRE BRAKE LIGHT INSTALLATION STEP
STEP 1
Remove your spare tire using a
applicable socket.
STEP 4
Set the spare tire brake light on the
studs of the spare tire mount. Make
sure that the wire is in the upper
position to ensure you have enough
length.
NKCELL
PLUG AND PLAY
LOSSLESS INSTALLATION
Uasge:Spare Tire Wheel Brake Light
Voltage:12v DC
Color Of Light:Red
LEDs:405PCS
Waterproof:IP67
Diameter:13.8 Inch(350mmx350mmx23mm)
STEP 2
Remove the screws from the high brake
light and open the plastic cover.
STEP 5
Plug the factory 3rd brake light in to the
brake light ring harness, Plug the brake
light ring into the factory harness.
SPECIFICATION
POWER
STEP 3
Unplug the factory 3rd brake light.
STEP 6
Reinstall back the plastic shell of the
high brake light and the spare tire.
The installation is complete.
Need help?
Do you have a question about the B0CLY4JZBV and is the answer not in the manual?
Questions and answers