RKC INSTRUMENT AC2002 Fitting Instructions Manual

FITTING INSTRUCTIONS
It is recommended that only a properly qualified person installs the product and carries out maintenance. If you are not
qualified and attempt to carry out such work ensure that all safety equipment is used and safety standards are met.
Ensure that you have read the full Product Manual before attempting to fit the product.
Ensure the Product Manual is kept with the vehicle and that any vehicle owner and/or operator are fully advised on the
system and its operation before attempting to drive or operate it.
DO NOT connect any electrical components to the vehicle without preparing the electrical system as per the vehicle
manufacturer's instructions.
damage or fire.
If you use a sharp utility knife or razor blade great care must be taken in all cases not to cut yourself during this
operation.
In some Countries, States or Territories it may not be legal to position the switches inside a vehicle or within reach
while operating the vehicle. Confirm with your relevant authorities.
The gauge is NOT weatherproof and is best mounted inside the cabin for easy pressure monitoring.
The switches should be mounted in a protected area to minimise the effect of moisture and dirt E.g. in or under a tray,
in tool box or canopy. If you mount them in the cabin please check local government regulations.
Air compressors get hot - avoid any flammable liquid or burn risk areas.
Incorrect use of
and/or the vehicle, which is not covered under warranty.
Ensure suspension airbags are maintained at the stated ride height at all times and maintain the minimum pressure
required and never exceed the maximum, as required by the particular airbag product.
AIR CONNECTIONS
WAC2002INS V1 21/06/16 BGC LH
Connecting without preparing the vehicle could lead to component failure, vehicle
this product can result in damage to the
ELECTRICAL CONNECTIONS
E&OE Copyright © 2016 RKC Holdings Pty Ltd
AC2002
components associated parts