VISIT OUR WEBSITE TO: Get usage advice, brochures, trouble shooter, service and repair information: www.zanussi.com/support SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damage that are the result of incorrect installation or usage.
staff kitchen areas in shops, offices and other working – environments; by clients in hotels, motels, bed & breakfast and other – residential type environments; areas for communal use in blocks of flats or in launderettes. – Do not exceed the maximum load of 7 kg (refer to the •...
• Make sure that there is air circulation between • Do not use an extension hose if the inlet hose is the appliance and the floor. too short. Contact the Authorised Service • When the appliance is in its permanent position, Centre for the replacement of the inlet hose.
PRODUCT DESCRIPTION APPLIANCE OVERVIEW Worktop Rating plate Detergent dispenser Drain pump filter Control panel Feet for levelling the appliance Door handle CHILD SAFETY DEVICE This device prevents children or pets to be closed in the drum. Turn the device clockwise, until the groove is horizontal. You cannot close the door.
E. Washing phase indicators. When a programme is set, all the • : the spin phase indicators of the phases related to the programme come on. • : the rinses phase When the programme starts, only the • : the washing phase indicator of the phase in operation flashes.
Page 8
Maximum load Programme Programme description Reference Temperature range (Type of load and soil level) spin speed 3 kg Special programme for cotton, synthetic and mixed Mixed Fabrics 1000 rpm fabrics with light soil. In case of setting cold wash cycle (mixed fabrics) make sure to use the detergent designed for low tempera- 60°C -...
PREWASH With this option you can add a prewash phase to a washing programme. Use this option for heavy soil. When you set this option the programme duration Indicator increases. The related indicator comes on. EXTRA RINSE With this option you can add some rinses to a washing programme.
BEFORE FIRST USE 1. Make sure that the electrical and water 4. Set and start a programme for cotton at the connections comply with the installation highest temperature without laundry. instructions. This removes all possible dirt from the drum and the 2.
Page 13
The drain pump can operate for a short time at the beginning of the washing cycle. STARTING A PROGRAMME WITH THE DELAY START OPTION 1. Press the button Delay Start again and again until the display shows the delay you Measure out the fabric Carefully close the deter- want to set.
2. Turn the programme knob again to activate the • In the display three flashing zeros come on. appliance. Now, you can set a new washing • The indicator of the Start/Pause goes off. programme. • The door lock indicator goes off.
• Be careful with the curtains. Remove the hooks • To help the environment, do not use more than and put the curtains in a washing bag or the correct quantity of detergent. pillowcase. • Obey the instructions that you find on the on •...
DOOR SEAL Make sure that all washing powder residue is re- moved from the upper and lower part of the recess. Use a small brush to clean the recess. Close the drawer and run the rinse programme with- Regularly examine the seal and remove all objects out any clothes in the from the inner part.
Unscrew carefully the CAUTION! When refitting the filter, drain filter to drain out the ensure it is securely re-tightened so as water. to stop leaks and young children being When no more water able to remove it. comes out, remove the filter.
WARNING! Make sure that the temperature is higher than 0 °C before you use the appliance again. The manufacturer is not responsible for damages caused by low temperatures. TROUBLESHOOTING • - The appliance does not drain the water. WARNING! Refer to Safety chapters. •...
Page 19
Problem Possible solution The appliance does not • Make sure that the sink spigot is not clogged. drain the water. • Make sure that the drain hose has no kinks or bends. • Make sure that the drain filter is not clogged. Clean the filter, if nec- essary.
TECHNICAL DATA Dimension Width/ Height/ Depth/ Total 596 mm/ 854 mm/ 607 mm/ 643 mm depth Electrical connection Voltage 220-230 V Overall power 2000 W Fuse 10 A Frequency 50 Hz Level of protection against ingress of solid particles and IPX4 moisture ensured by the protective cover, except where the low voltage equipment has no protection against...
Need help?
Do you have a question about the ZWF7030SBV and is the answer not in the manual?
Questions and answers