Advertisement

Quick Links

User Manual
GETTING
STARTED?
EASY.
ZWF 71340W
EN User Manual
Washing Machine

Advertisement

Table of Contents
loading

Summary of Contents for Zanussi ZWF 71340W

  • Page 1 User Manual GETTING STARTED? EASY. ZWF 71340W EN User Manual Washing Machine...
  • Page 2: Safety Information

    SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible if an incorrect installation and use causes injuries and damages. Always keep the instructions with the appliance for future reference. CHILDREN AND VULNERABLE PEOPLE SAFETY This appliance can be used by children aged from 8 years and •...
  • Page 3: Safety Instructions

    If the supply cord is damaged, it must be replaced by the • manufacturer, its Authorised Service Centre or similarly qualified persons in order to avoid a hazard. Before maintenance, deactivate the appliance and disconnect • the mains plug from the mains socket. Do not use water spray and steam to clean the appliance.
  • Page 4: Product Description

    SERVICE • Disconnect the appliance from the mains supply. • To repair the appliance contact an Authorised • Cut off the mains cable and discard it. Service Centre. • Remove the door catch to prevent children and • Use original spare parts only. pets to get closed in the appliance.
  • Page 5: Easy Start

    EASY START CONTROL PANEL DESCRIPTION Cotton 90° Jeans Cotton 60° Refresh 40° Synthetics 20min 30° Easy Iron Delicates Wool/ Spin Handwash Drain Dark Garments Rinse Mix 20° Programme knob Automatic spin reduction and Rinse Hold Delay Start button (Delay Start) Indicators Temperature button (Temp) Start/Pause button (Start/Pause)
  • Page 6 Maximum load Programme Programme description Maximum spin Temperature range (Type of load and soil level) speed 7 kg White cotton and colour-fast cotton. Normal soil. The Cotton 1300 rpm energy consumption decreases and the time of the wash- ing programme is extended. 60°C - 40°C Synthetics 3 kg...
  • Page 7 Maximum load Programme Programme description Maximum spin Temperature range (Type of load and soil level) speed 30' @ 30° 3 kg A short cycle for synthetics and delicate items with 30°C 700 rpm light soil level or for items to freshen up. 1) Standard programmes for the Energy Label consumption values.
  • Page 8: Consumption Values

    Programme Delay Start Quick 30' @ 30° ■ ■ 1) When you set the Quick option, we recommend that you decrease the quantity of the laundry. It is pos- sible to keep the full load but the washing results can be unsatisfactory. Recommended load: cotton: 3,5 kg, synthetics and delicates: 1,5 kg.
  • Page 9: Before First Use

    OPTIONS TEMP QUICK With this option you can change the default Press this button to decrease the programme temperature. duration. Set this option for items with light soil or items to Indicator = cold water. refresh. The indicator of the set temperature comes on. The related indicator comes on.
  • Page 10 LIQUID OR POWDER DETERGENT 3. Shake the items before you put them in the appliance. The default position of Make sure not to put too much laundry in the drum. the flap is A (powder de- Refer to max. loads indicated in "Programme chart". tergent).
  • Page 11 CANCELLING A RUNNING PROGRAMME If you set something incorrect, the 1. Turn the programme knob to position indicator of button Start/Pause flashes cancel the programme and to deactivate the red. appliance. 2. Turn the programme knob again to activate the STARTING A PROGRAMME WITHOUT THE appliance.
  • Page 12: Hints And Tips

    STAND BY • You must drain the water to open the door. Draining the water: Some minutes after the end of the washing programme, if you do not deactivate the appliance, 1. Set a draining (Drain) or a spinning (Spin) the energy saving status activates.
  • Page 13: Care And Cleaning

    water hardness is soft it is not necessary to use a Use the correct quantity of the water softener. water softener. Obey the instructions that you find on the packaging of the product. To know the water hardness in your area, contact your local water authority.
  • Page 14: Frost Precautions

    FROST PRECAUTIONS If the appliance is installed in an area where the temperature can be less than 0 °C, remove the remaining water from the inlet hose and the drain pump. Do this procedure also when you want to do the emergency drain. 1.
  • Page 15 Problem Possible solution The appliance does not fill • Make sure that the water tap is open. with water properly. • Make sure that the pressure of the water supply is not too low. For this information, contact your local water authority. •...
  • Page 16: Technical Data

    find the information on the rating plate: model (Mod.), PNC (Prod.No.), Serial number (Ser.No.). TECHNICAL DATA Dimension Width/ Height/ Depth/ To- 600 mm/ 850 mm/ 559 mm/ 578 mm tal depth Electrical connection Voltage 230-240 V Overall power 2200 W Fuse 13 A Frequency...
  • Page 20 WWW.ZANUSSI.COM/SHOP...

Table of Contents