Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for IMOU Smart Robot Vacuum Cleaner
Summary of Contents for IMOU Smart Robot Vacuum Cleaner
- Page 1 UserManual V1.0.1 Smart Robot Vacuum Cleaner Series...
-
Page 2: Safety Precautions
Safety Precautions Usage Restrictions P lasticbagscanbe dangerous.Keepthemawayfrominfantsandchildrentoavoidtheriskofsuffocation. This product is only meant to clean floors in a home environment. Do not use it outdoors (such as in an open balcony), on other non-floor surfaces (such as sofas), or in commercial or industrial settings. - Page 3 Battery and Charging Do not place the device near heat sources, such as radiators. Donotwipeorcleanthechargingdockclipswithadampclothorwethands. Do not dispose of batteries with your regular trash. Batteries should be disposed of by professional recycling agencies. If the power cord is damaged, it must be replaced by professionals from the manufacturer, the manufacturer’ s service department, or a similar department to avoid danger. If the product must be transported, ensure the device is turned off.
-
Page 4: Package Contents
PackageContents Accessories Installed on the Robot Diagrams of products, accessories, user interfaces, and other items in the manual are schematic diagrams and are for reference only. The actual product may differ slightly from diagrams in the manual due to product updates and upgrades. - Page 5 Overview Robot Top View Robot Bottom View Mop Cloth Module Infrared Sensor Main Brush Cover Laser Radar Main Brush Main Wheel Collision Buffer Board Cliff Sensor Recharge Button/ Indicator Light Bumper Strips Side Brush Omnidirectional Power Button/ Wheel Indicator Light Obstacle Avoidance Sensor Cliff Sensor EN |...
-
Page 6: Charging Dock
Charging Dock Force Indicator Charging Plate Shutdown Button Dust Box Wall- Release Button following Lentille Sensor infrarouge Charging Contacts Dust Box Filter Cartridge Protective Plate Protective Plate Filter Power Release Latch Adapter Port EN |... -
Page 7: Led Indicator Patterns
LED Indicator Patterns LED Status Device Status Solid on The robot is standby / cleaning The robot is charging / turning on Breath White Cleaning is paused Flashes slowly Flashes fast to off The robot is turning off Flashes fast The robot malfunctions The robot is recharging Solid on... -
Page 8: Notes Before Use
Please make sure that your mobile phone is connected to a 2.4 Ghz Wi-Fi network. Ensure that the Wi-Fi password does not include “ “ or spaces. Scan the QR code below or search for the “Imou Life” app in the App Store to download Tidy up the plugs and power cords Fold the carpet tasseled edges under and install the app. -
Page 9: Charging The Robot
Installation and Use/Preparation Remove protective strips Charging the robot Place the robot on a level ground and remove the protective materials. Press and hold for 3 seconds to start the robot. Then, press to recall the robot to the dock for charging. The robot will enter standby mode after it is fully charged. -
Page 10: Standby/Sleep Mode
Installation and Use/ Cleaning Cleaning Standby/Sleep Mode to start Auto cleaning; When the robot is fully charged and securely docked, press and hold Press and hold for 3 seconds to start Spot cleaning. button for 3 seconds to enable low-power standby mode. The mode will be automatically disabled if the robot's battery level drops below 90% or if it begins a cleaning task. - Page 11 Installation and Use/Mopping Remove the two-in-one water tank Install the mop holder Press the Dust Box Release button to remove the two-in-one water tank. Add water It is recommended that you use purified water. Press to start Auto mopping; Press for 3 seconds to start Spot mopping.
-
Page 12: Regular Maintenance
Regular Maintenance Clean Sensors To keep the device at best performance, please refer to the following maintenance Wall-following Sensor Infrared Sensor frequencies. Charging Plate Please use a soft and clean cloth to wipe the parts, and avoid using any detergents or cleaning sprays. Parts Maintenance Replacement... - Page 13 Clean the Main Brush Clean/Replace the Side Brush Remove the screws of the side brush with a screwdriver. Press the catch on the cover of the Then, remove the side brush. main brush. Then, remove the main brush cover and the main brush. Replace the side brush after cleaning, or install a Cut entangled hairs and fur on the new side brush.
- Page 14 Cleaning the Two-in-one Water Tank Use the cleaning brush to clean the filter and Press and hold the two-in-one water tank Remove the filter cartridge. any debris on the filter cartridge. release button, and pull the water tank out. Use a dry cloth to clean the dust box. After the Remove the filter.
-
Page 15: Battery Maintenance
Open the water tank cover and add an appropriate amount of water. Mopping will be less effective if the mop cloth is too dirty. Do clean the mop cloth in a timely manner. It is recommended that you use purified water. Always remove the mop cloth, clean it, and wring it dry before re- installing it and using it. -
Page 16: Troubleshooting
Troubleshooting When an abnormality occurs while the device is running, the power indicator light will flash red quickly. There will be voice prompts for some abnormalities. Refer to the table below for possible solutions. Voice Prompts/ Possible Reason Solutions Fault Description Remove obstacles, or move the device to a flat and open area, and restart it. - Page 17 Troubleshooting Voice Prompts/ Possible Reason Solutions Fault Description Battery is damaged or has not The battery temperature is too high or too low. Wait until the battery Battery is abnormal while charging been properly installed temperature is normal before using it. The battery is insufficient.
- Page 18 Troubleshooting Voice Prompts/ Possible Reason Solutions Fault Description Check if there is water in the tank. Wash the mop cloth. Install the mop The water tank is out of water, the mop cloth is cloth correctly according to the manuals. Check if the drain hole is clogged No or little water discharged too dirty, or the mop holder is not installed in the with foreign objects and pay attention to adding clean water without...
Need help?
Do you have a question about the Smart Robot Vacuum Cleaner and is the answer not in the manual?
Questions and answers