Related Manuals for MyQ L932M
Summary of Contents for MyQ L932M
- Page 1 3-BUTTON REMOTE CONTROL MODELS: L993M, CH363, & CH363C 2-BUTTON KEYCHAIN REMOTE CONTROL MODELS: L932M, CH382, & CH382C Product Manual...
-
Page 2: Programming The Remote
Your remote control can be programmed to operate up to three (L993M, CH363, & CH363C) or two (L932M, CH382, & CH382C) garage door openers. Each button on the remote control works independently of the other and must be programmed separately. The images throughout this manual are for reference only and your product may look different. - Page 3 Programming the Remote 2-Button Keychain Remote Control 3-Button Remote Control Prepare: • Read through the Instructions carefully. • Watch out for time sensitive instructions marked with an hourglass icon. • Make sure the garage door is clear of ALL obstructions. •...
- Page 4 There are three ways to program your remote to a garage door opener with a yellow LEARN button. Tap your preferred method below. Option 1: To program your remote using the myQ app, tap the myQ app icon. Option 2: To program your remote using garage door opener’s LEARN button, tap the LEARN button icon.
- Page 5 Program Remote to Garage Door Opener Using a Yellow, Purple, Orange, or Red LEARN Button Yellow Purple (Brown) Orange IMPORTANT: Read through all programming steps before you start. Press and hold the two smaller buttons on the remote simultaneously until the red LED stays on (typically within 6 seconds).
- Page 6 Program Remote to Garage Door Opener with a Yellow LEARN Button Using the Control Panel Yellow IMPORTANT: Read through all programming steps before you start. Press and hold the two smaller buttons on the remote simultaneously until the red LED stays on (typically 6 seconds).
- Page 7 There are three ways to program your remote to a garage door opener with a white LEARN button. Tap your preferred method below. Option 1: To program your remote using the myQ app, tap the myQ app icon. Option 2: To program your remote using garage door opener’s LEARN button, tap the LEARN button icon.
- Page 8 Once your remote is programmed in the myQ app, you can name your remote, view access history, and receive notifications when your remote activates the garage door opener.
- Page 9 Program Remote to Garage Door Opener with a White LEARN Button Using the LEARN Button White IMPORTANT: Read through all programming steps before you start. Press and immediately Learn release the LEARN button. Button Learn Button 30 Seconds Within 30 seconds, press and hold the remote button that you would like to program.
- Page 10 Program Remote to Garage Door Opener with a White LEARN Button Using the Control Panel White IMPORTANT: Read through all programming steps before you start Follow the instructions below for your control panel model to set your garage door opener into programming mode. Control Panel Push Button Door Control Smart Control Panel...
- Page 11 Test your Remote has Programmed Successfully TEST FOR SUCCESS: Press the remote button that you programmed. The garage door opener will activate. If the garage door opener does not activate, wait for the garage door opener’s LEARN button LED to turn off (for a yellow or white LEARN button this could take up to 3 minutes).
- Page 12 Replacing the Battery: 3-Button Remote Control The LED on your remote control will stop flashing when the battery is low and needs to be replaced. Replace the battery with only 3V CR2032 coin cell battery. Dispose of the old battery properly. To replace the battery, follow the instructions as shown below.
- Page 13 Replacing the Battery: 2-Button Keychain Remote Control The LED on your remote control will stop flashing when the battery is low and needs to be replaced. Replace the battery with only 3V CR2032 coin cell battery. Dispose of the old battery properly.
- Page 14 Replacing the Battery (continued) WARNING • INGESTION HAZARD: This product contains a button cell or coin battery. • DEATH or serious injury can occur if ingested. • A swallowed button cell or coin battery can cause Internal Chemical Burns in as little as 2 hours. •...
-
Page 15: Additional Resources
©2025 The Chamberlain Group LLC myQ and the myQ logo are trademarks, service marks, and/or registered trademarks of The Chamberlain Group LLC. All other trademarks, service marks and product names used herein are the property of their respective owners.
Need help?
Do you have a question about the L932M and is the answer not in the manual?
Questions and answers