Honda GROM 2026 Owner's Manual
  1. Manuals
  2. Brands
  3. Honda Manuals
  4. Motorcycle
  5. GROM 2026
  6. Owner's manual
Honda GROM 2026 Owner's Manual

Honda GROM 2026 Owner's Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
OW N E R'S
M A N UA L
2026 GROM

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the GROM 2026 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Honda GROM 2026

Summary of Contents for Honda GROM 2026

  • Page 1 OW N E R’S M A N UA L 2026 GROM...
  • Page 2 This publication includes the latest production information available before printing. Honda Motor Co., Ltd. reserves the right to make changes at any time without notice and without incurring any obligation.
  • Page 3 Welcome Congratulations on your purchase of a new When service is required, remember that Honda vehicle. Your selection of a Honda your Honda dealer knows your vehicle best. makes you part of a worldwide family of If you have the required mechanical “know- satisfied customers who appreciate Honda's how”...
  • Page 4 A Few Words About Safety DANGER Your safety, and the safety of others, is very important. Operating this vehicle safely is an You WILL be KILLED or SERIOUSLY important responsibility. HURT if you don’t follow instructions. To help you make informed decisions about safety, we have provided operating WARNING procedures and other information on safety...

  • Page 5: Table Of Contents

    Contents Vehicle Safety P. 2 Operation Guide P. 16 Maintenance P. 47 Troubleshooting P. 84 Information P. 93 Specifications P. 116...

  • Page 6: Vehicle Safety

    Vehicle Safety This section contains important information for safe riding of your vehicle. Please read this section carefully. Safety Guidelines ..........P. 3 Safety Labels............P. 7 Safety Precautions..........P. 9 Riding Precautions ..........P. 10 Accessories & Modifications......P. 14 Loading ..............

  • Page 7: Safety Guidelines

    Safety Guidelines Safety Guidelines Before Riding Make sure that you are physically fit, mentally Follow these guidelines to enhance your safety: focused, and free of alcohol and drugs. Check Perform all routine and regular inspections ● that you and your passenger are both wearing specified in this manual.

  • Page 8: Ride Defensively

    Safety Guidelines We recommend that all riders take a certified Make Yourself Easy to See course approved by the Motorcycle Safety Make yourself more visible, especially at night, Foundation (MSF) or a state approved training by wearing bright reflective clothing, positioning course.
  • Page 9 Safety Guidelines bolts, and check the handlebar, control levers, Keep Your Honda in Safe Condition brakes, and wheels. Ride slowly and cautiously. It's important to keep your vehicle properly Your vehicle may have suffered damage that is maintained and in safe riding condition.

  • Page 10: Carbon Monoxide Hazard

    Safety Guidelines WARNING Carbon Monoxide Hazard Exhaust contains poisonous carbon monoxide, a Running the engine of your vehicle colorless, odorless gas. Breathing carbon while in an enclosed or even partially monoxide can cause loss of consciousness and enclosed area can cause a rapid build- may lead to death.

  • Page 11: Safety Labels

    Safety Labels Safety Labels If a label comes off or becomes hard to read, contact your dealer for a replacement. Safety and information labels on your vehicle provide important safety information and may warn you of potential hazards that could cause serious injury.
  • Page 12 Safety Labels...

  • Page 13: Safety Precautions

    Safety Precautions Safety Precautions Must fit comfortably but securely, with the ● chin strap fastened. Ride cautiously and keep your hands on the Face shield with unobstructed field of vision ● ● handlebar and feet on the footpegs. or other approved eye protection. Instruct your passenger to keep their hands ●...

  • Page 14: Riding Precautions

    Riding Precautions Riding Precautions Boots or Riding Shoes Sturdy boots with non-slip soles and ankle protection. Break-in Period Jacket and Pants During the first 300 miles (500 km) of running, follow these guidelines to ensure your vehicle's Protective, highly visible, long-sleeved jacket future reliability and performance.
  • Page 15 Riding Precautions Anti-lock Brake System (ABS) on Front Brakes Wheel Observe the following guidelines: Grom ABS type Avoid excessively hard braking and ● This model equipped with an Anti-lock Brake downshifting. System (ABS) designed to help prevent the front Sudden braking can reduce the vehicle's brake from locking up during hard braking.
  • Page 16 Riding Precautions Engine Braking Parking Engine braking helps slow your vehicle down Park on a firm, level surface. ● when you release the throttle. For further If you must park on a slight incline or loose ● slowing action, downshift to a lower gear. Use surface, park so that the vehicle cannot engine braking with intermittent use of the move or fall over.
  • Page 17 Riding Precautions Parking with the Side Stand Refueling and Fuel Guidelines Stop the engine. Follow these guidelines to protect the engine, Push the side stand down. fuel system, and catalytic converter: Slowly lean the vehicle to the left until its Use only unleaded gasoline.

  • Page 18: Accessories & Modifications

    We strongly advise that you do not add any seriously hurt or killed. accessories that were not specifically designed or approved for your vehicle by Honda or make Follow all instructions in this owner's modifications to your vehicle from its original manual regarding accessories and design.

  • Page 19: Loading

    Loading Loading WARNING Carrying extra weight affects your vehicle's ● Overloading or improper loading can handling, braking, and stability. cause a crash and you can be seriously Always ride at a safe speed for the load you hurt or killed. are carrying.

  • Page 20: Basic Operation Flow

    Basic Operation Flow Pre-ride Inspection (P.54) Acceleration Carefully inspect your vehicle to make sure that it is safe to ride. Apply throttle gradually. Obey the speed limit. Shift Change (P.44) Starting the Engine (P.41) Start and warm the engine. Avoid revving the engine. Starting the How to use basic features.

  • Page 21: Turning Corners

    Parking (P.12) Braking Close the throttle and apply the Park on a firm level surface. front and rear brakes together. Use the stand, and lock the The brake light will indicate that steering. you have applied the brakes. Stopping If pulling off the road, signal early enough to show traffic that you are pulling over, and pull over smoothly.

  • Page 22: Parts Location

    Parts Location Document bag (P.46) Fuse box (P.91) Battery (P.71) Rear brake fluid reservoir (P.75) Front brake fluid reservoir (P.75) Front brake lever Throttle grip (P.83) Engine oil fill cap (P.73) Rear brake pedal Engine oil level inspection window (P.73) Brake light switch (P.77)
  • Page 23 Clutch lever (P.80) Fuel fill cap (P.45) Seat (P.72) Helmet holder (P.46) Seat lock (P.72) Drive chain (P.79) Side stand (P.78) Shift pedal (P.44)
  • Page 24 Instruments Tachometer NOTICE Do not operate the engine in the tachometer red zone. Excessive engine speed can adversely affect engine life. Tachometer red zone (excessive engine rpm range) button button Display Check When the ignition switch is turned to the ON position, all the mode and digital segments will show.
  • Page 25 Clock (12-hour display) To set the clock: (P.28) Odometer [TOTAL] and Tripmeter [TRIP A/B] (P.22) Gear position indicator The gear position is shown in the gear position indicator. “-” appears when the transmission is not shifted properly. Speedometer Average fuel mileage [AVG], Fuel consumption, and Average speed [AVG] (P.24) Fuel gauge...
  • Page 26 Instruments (Continued) Odometer [TOTAL] and Tripmeter [TRIP A/B] button switches between the odometer, tripmeter A, and tripmeter B. Odometer Tripmeter A Tripmeter B Odometer [TOTAL] Total distance ridden. When “ ” is displayed, go to your dealer for service. Tripmeter [TRIP A/B] Distance ridden since tripmeter was reset.
  • Page 27 To reset the tripmeter B, average fuel To reset the tripmeter [TRIP A/B], mileage B, fuel consumption B, and average average fuel mileage [AVG], fuel speed B (these are based on tripmeter B) consumption, and average speed together, press and hold the button [AVG] while tripmeter B is displayed.
  • Page 28 Instruments (Continued) Average fuel mileage [AVG], Fuel consumption, and Average speed [AVG] button switches between the average fuel mileage, fuel consumption, and average speed. Average fuel mileage Fuel consumption Average speed...
  • Page 29 Average fuel mileage [AVG] Grom ABS type for Canada Display range: 0.0 to 299.9 L/100km (km/L, Displays the average fuel mileage since the mile/gal, or mile/L) selected tripmeter was reset. • More than 299.9 L/100km (km/L, mile/gal, The average fuel mileage will be calculated or mile/L): “299.9”...
  • Page 30 Instruments (Continued) Fuel consumption Average speed [AVG] Displays the average speed since the selected Displays the fuel consumption since the tripmeter was reset. selected tripmeter was reset. The average speed will be calculated based The fuel consumption will be calculated on value displayed on the tripmeter (A or B) based on value displayed on the tripmeter (A selected.
  • Page 31 Display Setting Setting Mode A The following items can be changed sequentially. (P.28) • Clock setting • Backlight brightness adjustment • Changing the speed and mileage unit • Unit setting Setting Mode B The following items can be changed sequentially. (P.31) •...
  • Page 32 Instruments (Continued) Setting Mode A 1 Clock setting: If the button is not pressed for about 30 Turn the ignition switch to the ON position. Press and hold the and the seconds, the control is automatically switched buttons until the hour digits start flashing. from the setting mode to the ordinary display.
  • Page 33 Press the button until the desired 2 Backlight brightness adjustment: minute is displayed. You can adjust the brightness to one of five Press and hold the button to levels. advance the minute fast. Press the button. The brightness is switched. Press the button.

  • Page 34: Unit Setting

    Instruments (Continued) 3 Changing the speed and mileage unit: 4 Unit setting: Press the button to select either “mph” You can change the fuel mileage units. and “mile” or “km/h” and “km”. Select the “km/L” or “L/100km” using the Press the button.
  • Page 35 Setting Mode B 1 Setting of REV indicator: If the button is not pressed for about 30 Initial setting seconds, the control is automatically switched blinking RPM: 7,500 r/min (rpm) from the setting mode to the ordinary interval RPM: 250 r/min (rpm) display.
  • Page 36 Instruments (Continued) You can change the setting of the REV and the numerical tachometer display shows indicator. Tachometer bar segment is displayed as REV indicator is blinking while setting. conventional display, regardless of set up button REV indicator display method. Each time button is pressed, the lighting RPM set value increase by...
  • Page 37 Press the button. The REV indicator lighting RPM is set, and then the display moves to the setting of REV indicator lighting interval RPM. Tachometer At the same time, the blinking bar segment shows the currently applied setting originated from the REV indicator Numerical tachometer lighting RPM and the numerical display...
  • Page 38 Instruments (Continued) Press the button. The REV indicator Ex When REV indicator lighting RPM is set at lighting interval RPM is set, and then the 8,000 r/min (rpm) and REV indicator display moves to the brightness adjustment lighting interval RPM is 250 r/min (rpm). of the REV indicator.
  • Page 39 2 Changing of tachometer display Conventional Tachometer bar mode: display segment Press the button to switch the display mode of tachometer. Press the button. The currently selected displaying mode is set, and the control returns to the ordinary display. Peak hold Conventional display display Shows the engine RPM on the tachometer...
  • Page 40 Indicators If one of these indicators does not come on when it should, have your dealer check for problems. ABS (Anti-lock Brake System) indicator Grom ABS type Comes on when the ignition switch is turned to the ON position. Goes off when your speed reaches approximately 6 mph (10 km/h).

  • Page 41: Neutral Indicator

    Neutral indicator High beam indicator Comes on when the transmission is in Neutral. Left turn signal indicator Right turn signal indicator REV indicator (P.31) Comes on briefly when the ignition switch is turned to the ON position.
  • Page 42 Switches Engine stop switch Should normally remain in the (Run) position. In an emergency, switch to the (Stop) position (the starter motor will not operate) to stop the engine. Start button Turn signal switch Pressing the switch turns the turn signal off. Horn button Headlight dimmer switch •...

  • Page 43: Ignition Switch

    Ignition switch Switches the electrical system on/off, locks the steering. Key can be removed when in the OFF or LOCK position. Turns electrical system on for starting/riding. Turns engine off. LOCK Lock steering. Continued...

  • Page 44: Ignition Key

    Switches (Continued) Steering Lock Locking Turn the handlebar all the way to the left. Lock the steering when parking to help Push the key down, and turn the ignition prevent theft. switch to the LOCK position. A U-shaped wheel lock or similar device is Jiggle the handlebar if the lock is difficult also recommended.

  • Page 45: Starting The Engine

    Starting the Engine Start your engine using the following NOTICE procedure, regardless of whether the engine • If the engine does not start within 5 seconds, is cold or warm. turn the ignition switch to the OFF position and wait 10 seconds before trying to start the engine again to recover battery voltage.
  • Page 46 Starting the Engine (Continued) Make sure the engine stop switch is in the About 1/8 in (3 mm), without (Run) position. freeplay Turn the ignition switch to the ON position. Shift the transmission to Neutral ( indicator comes on). Alternatively, pull in the clutch lever to start your motorcycle while the transmission is in gear as long as the side stand is raised.
  • Page 47 If the engine does not start: Open the throttle fully and press the start button for 5 seconds. The engine will not start at this time. (When the throttle is fully open, the engine will not start when the start button is pressed.) Release the throttle and start button after 5 seconds and proceed to step b.

  • Page 48: Shifting Gears

    Shifting Gears Your vehicle transmission has 5 forward Recommended Shift Points gears in a one-down, four-up shift pattern. Shifting Up From 1st to 2nd 12 mph (20 km/h) From 2nd to 3rd 19 mph (30 km/h) From 3rd to 4th 25 mph (40 km/h) From 4th to 5th 31 mph (50 km/h)
  • Page 49 Refueling Opening the Fuel Fill Cap Ignition key Open the lock cover, insert the ignition key, Lock cover and turn it clockwise to open the fuel fill cap. Closing the Fuel Fill Cap Lower edge After refueling, push the fuel fill cap until it of filler neck locks.

  • Page 50: Storage Equipment

    Storage Equipment The Helmet holder is located under the seat. The document bag is located underside of the seat by the rubber strap. Helmet holder Rubber strap Document bag WARNING Use the helmet holder only when parked. Riding with a helmet attached to the holder can interfere with the rear wheel Removing the Seat (P.72)

  • Page 51: Maintenance

    Please read “Importance of Maintenance” and “Maintenance Fundamentals” carefully before attempting any maintenance. Refer to “Specifications” for service data. An optional larger tool kit may be available. Check with your Honda dealer's parts department. Importance of Maintenance ......P. 48 Maintenance Schedule........P. 50 Maintenance Record.........

  • Page 52: Importance Of Maintenance

    Importance of Maintenance WARNING Importance of Maintenance Keeping your vehicle well-maintained is Improperly maintaining your vehicle or absolutely essential to your safety and to failing to correct a problem before you protect your investment, obtain maximum ride can cause a crash in which you can performance, avoid breakdowns, and reduce air be seriously hurt or killed.

  • Page 53: Maintenance Safety

    Importance of Maintenance For information about the exhaust emission and Maintenance Safety noise emission requirements of the U.S. Always read the maintenance instructions Environmental Protection Agency (EPA), the before you begin each task and make sure that California Air Resources Board (CARB), and the you have the tools, parts, and skills required.

  • Page 54: Maintenance Schedule

    Maintenance work should be performed in owner. accordance with Honda's standards and specifications by properly trained and equipped technicians. Your dealer meets all of these requirements. All scheduled maintenance is considered a normal owner operating cost and will be charged to you by your dealer.
  • Page 55 Maintenance Legend mechanically skilled. Inspect (clean, adjust, lubricate, or replace, if necessary) Procedures are provided in an official Honda Service Replace Manual (2 P. 109). Lubricate : Technical. In the interest of safety, have your vehicle Clean serviced by your dealer.
  • Page 56 Maintenance Schedule Frequency Items × 1,000 mi Regular Refer to Replace page × 1,000 km 12.8 19.2 25.6 32.0 38.4 Drive Chain Every 300 mi (500 km): Brake Fluid 2 Years Brake Pads Wear Brake System Brake Light Switch Headlight Aim –...

  • Page 57: Maintenance Record

    Maintenance Record Distance Odometer Date Performed By: Notes 600 miles (1,000 km) 4,000 miles (6,400 km) 8,000 miles (12,800 km) 12,000 miles (19,200 km) 16,000 miles (25,600 km) 20,000 miles (32,000 km) 24,000 miles (38,400 km) 28,000 miles (44,800 km) 32,000 miles (51,200 km) 36,000 miles (57,600 km) 40,000 miles (64,000 km)

  • Page 58: Maintenance Fundamentals

    Maintenance Fundamentals Check the following items after you get on your Pre-ride Inspection vehicle: To ensure safety, it is your responsibility to Throttle action moves smoothly without ● perform a pre-ride inspection and make sure binding. P. 83 that any problem you find is corrected. A pre- Brake lever and pedal operate normally.
  • Page 59 Maintenance Fundamentals Periodic Checks You should also perform other periodic maintenance checks at least once a month regardless of how often you ride, or more often if you ride frequently. Also, check the odometer reading against the Maintenance Schedule and perform all maintenance that is due.
  • Page 60 Maintenance Fundamentals WARNING Replacing Parts Always use Honda Genuine Parts or their Installing non-Honda parts may make equivalents to ensure reliability and safety. your vehicle unsafe and cause a crash in When ordering colored components, specify which you can be seriously hurt or the model name, color, and code mentioned on killed.
  • Page 61 Maintenance Fundamentals Battery This symbol on the battery means that this product must not be treated as Your vehicle has a maintenance-free type household waste. battery. You do not have to check the battery electrolyte level or add distilled water. Clean the NOTICE battery terminals if they become dirty or An improperly disposed of battery can be...
  • Page 62 Maintenance Fundamentals WARNING What to do in an emergency If any of the following occur, immediately see The battery gives off explosive your doctor. hydrogen gas during normal operation. Electrolyte splashes into your eyes: ● Wash your eyes repeatedly with cool water for at least 15 minutes.
  • Page 63 Maintenance Fundamentals Cleaning the Battery Terminals Remove the battery. P. 71 If the terminals are starting to corrode and are coated with a white substance, wash with warm water and wipe clean. If the terminals are heavily corroded, clean and polish the terminals with a wire brush or sandpaper.
  • Page 64 Bump starting is also not 30 days using a charger designed specifically for recommended. your Honda, which can be purchased from your NOTICE dealer. Read the information that came with Installing non-Honda electrical accessories can...
  • Page 65 Maintenance Fundamentals Fuses NOTICE Replacing a fuse with one that has a higher Fuses protect the electrical circuits on your rating greatly increases the chance of damage to vehicle. If something electrical on your vehicle the electrical system. stops working, check for and replace any blown fuses.
  • Page 66 “Specifications.” P. 117 oils, excluding oils marked as “Energy Conserving” or “Resource Conserving” on the circular API If you use non-Honda engine oil, check the service symbol. label to make sure that the oil satisfies all of the following standards:...

  • Page 67: Recommended Brake Fluid

    Wipe up spills immediately and wash thoroughly. your dealer. Recommended brake fluid: Also inspect the drive sprocket and driven Honda DOT 3 or DOT 4 Brake Fluid or sprocket. If either has worn or damaged teeth, equivalent have the sprocket replaced by your dealer.
  • Page 68 Use a dry cloth with high flash-point solvent. Use a soft brush if the chain is dirty. After cleaning, wipe dry and lubricate with the recommended lubricant. Recommended lubricant: Pro Honda HP Chain Lube or equivalent...
  • Page 69 Maintenance Fundamentals Crankcase Breather Service more frequently when riding in rain, at full throttle, or after the vehicle is washed or overturned. Service if the deposit level can be seen in the transparent section of the drain tube. If the drain tube overflows, the air filter may become contaminated with engine oil, causing poor engine performance.
  • Page 70 Maintenance Fundamentals Inspecting for Abnormal Wear Tires (Inspecting/Replacing) Checking the Air Pressure Inspect the tires for Visually inspect your tires and use an air signs of abnormal wear pressure gauge to measure the air pressure at on the contact surface. least once a month or any time you think the tires look low.
  • Page 71 Maintenance Fundamentals WARNING Inspecting Tread Depth Inspect the tread wear indicators. If they Riding on tires that are excessively worn become visible, replace the tires immediately. or improperly inflated can cause a crash in which you can be seriously hurt or killed.
  • Page 72 Maintenance Fundamentals Have your tires replaced by your dealer. WARNING For recommended tires and air pressure, see “Specifications.” P. 117 Installing improper tires on your vehicle Follow these guidelines whenever you replace can adversely affect handling and tires: stability, and can cause a crash in which Use the recommended tires or their ●...
  • Page 73 Maintenance Fundamentals Tire Identification Number (TIN) Tire Service Life The tire identification number (TIN) is a group The service life of your tires is dependent on of numbers and letters located on the sidewall many factors, including, but not limited to, of the tire.

  • Page 74: Tire Identification Number (Tin)

    Maintenance Fundamentals Format A Tire Labeling Example DOT XXXX XXXX 20 24 Tire identification DOT: This indicates that the tire meets all number (TIN) requirements of the U.S. Department of Transportation. a XXXX: Factory code b XXXX: Tire type code c 20 24: Date of manufacture (week &...

  • Page 75: Removing & Installing Body Components

    Removing & Installing Body Components Battery Remove the seat. P. 72 Remove the battery holder by removing the bolt. Battery holder Bolt Disconnect the negative - terminal from Positive terminal the battery. Disconnect the positive + terminal from the battery. Remove the battery, taking care not to drop the terminal nuts.

  • Page 76: Seat

    Removing & Installing Body Components Seat Seat Removal Insert the ignition key into the seat lock. Turn it clockwise, then pull the seat up Prongs Seat and backward. Installation Insert the prongs into the stays on the frame. Push forward and down on the rear of the seat until it locks in place.

  • Page 77: Checking The Engine Oil

    Engine Oil Checking the Engine Oil Oil level inspection If the engine is cold, idle the engine for 3 window to 5 minutes. Turn the ignition switch to the OFF Upper level position and wait for 2 to 3 minutes. Place your vehicle in an upright position on a firm, level surface.

  • Page 78: Adding Engine Oil

    Engine Oil Adding Engine Oil Adding Engine Oil NOTICE Overfilling with oil or operating with insufficient oil can cause damage to your engine. Do not mix If the engine oil is below or near the lower different brands and grades of oil. They may level mark, add the recommended engine oil.

  • Page 79: Brakes

    Brakes Checking Brake Fluid If the brake fluid level in either reservoir is below the LWR or LOWER level mark or the brake lever and pedal freeplay becomes Place your vehicle in an upright position excessive, inspect the brake pads for wear. on a firm, level surface.

  • Page 80: Inspecting The Brake Pads

    Brakes Inspecting the Brake Pads Inspecting the Brake Pads Brake pads Front Check the condition of the brake pad wear indicators. The pads need to be replaced if a brake pad is worn to the indicator. Inspect the brake pads from below Front Wear the brake caliper.

  • Page 81: Adjusting The Brake Light Switch

    Brakes Adjusting the Brake Light Switch Adjusting the Brake Light Switch Check the operation of the brake light switch. Hold the brake light switch and turn the adjusting nut in the direction A if the switch operates too late, or turn the nut in the direction B if the switch operates too soon.

  • Page 82: Checking The Side Stand

    Side Stand Checking the Side Stand Sit on the vehicle, shift the transmission to Neutral, and raise the side stand. Start the engine, pull the clutch lever in, and shift the transmission into gear. Lower the side stand all the way. The engine should stop as you lower the side stand.

  • Page 83: Drive Chain

    Drive Chain Inspecting the Drive Chain Do not ride your vehicle if the slack exceeds 1 15/16 in (50 mm). Slack Check the drive chain slack at several points Drive chain along the chain. If the slack is not constant at all points, some links may be kinked and binding.

  • Page 84: Checking The Clutch

    Clutch Checking the Clutch Check the clutch cable for kinks or signs of wear. If necessary, have it replaced by your Checking the Clutch Lever Freeplay dealer. Lubricate the clutch cable with a Check the clutch lever freeplay. commercially available cable lubricant to Freeplay at the clutch lever: prevent premature wear and corrosion.

  • Page 85: Adjusting The Clutch Lever Free Play

    Clutch Adjusting the Clutch Lever Freeplay Adjusting the Clutch Lever Rubber dust cover Freeplay Upper Adjustment Attempt adjustment with the upper clutch cable adjuster first. Upper lock nut Pull back the rubber dust cover. – Loosen the upper lock nut. Upper clutch Turn the upper clutch cable adjuster until cable adjuster...
  • Page 86 Clutch Adjusting the Clutch Lever Freeplay Loosen the upper lock nut and turn the Lower lock nut upper clutch cable adjuster all the way in to provide maximum freeplay. Tighten the upper lock nut. Loosen the lower lock nut. Turn the lower clutch cable adjusting nut –...

  • Page 87: Throttle

    Throttle Checking the Throttle With the engine off, check that the throttle rotates smoothly from fully closed to fully open in all steering positions and throttle freeplay is correct. If the throttle does not move smoothly or close automatically, or if the cable is damaged, have the vehicle inspected by your dealer.

  • Page 88: Troubleshooting

    Troubleshooting Engine Will Not Start........P. 85 Warning Indicators On or Flashing....P. 86 PGM-FI (Programmed Fuel Injection) Malfunction Indicator Lamp (MIL)....P. 86 ABS (Anti-lock Brake System) Indicator ..P. 86 Other Warning Indications......P. 87 Fuel Gauge Failure Indication......P. 87 Tire Puncture ............

  • Page 89: Engine Will Not Start

    Engine Will Not Start Starter Motor Operates But Starter Motor Does Not Engine Does Not Start Operate Check the following items: Check the following items: Check the correct engine starting Check the correct engine starting ● ● sequence. P. 41 sequence.

  • Page 90: Warning Indicators On Or Flashing

    Warning Indicators On or Flashing PGM-FI (Programmed Fuel Indicator comes on or starts flashing while ● riding. Injection) Malfunction Indicator does not come on when the ● Indicator Lamp (MIL) ignition switch is in the ON position. Indicator does not go off at speeds above ●...

  • Page 91: Other Warning Indications

    Other Warning Indications Fuel Gauge Failure Indication If the fuel system has an error, the fuel gauge indicators will be displayed as shown in the illustration. If this occurs, see your dealer as soon as possible.

  • Page 92: Tire Puncture

    Tire Puncture WARNING Repairing a puncture or removing a wheel requires special tools and technical expertise. Riding your vehicle with a temporary We recommend you have this type of service tire repair can be risky. If the temporary performed by your dealer. repair fails, you can crash and be After an emergency repair, always have the seriously injured or killed.

  • Page 93: Electrical Trouble

    Electrical Trouble Battery Goes Dead Burned-out Light Bulb Charge the battery using a motorcycle Follow the procedure below to replace a battery charger. burned-out light bulb. Remove the battery from the vehicle before Turn the ignition switch to the OFF or LOCK charging.
  • Page 94 Electrical Trouble Burned-out Light Bulb Front/Rear Turn Signal Bulb License Plate Light Bulb The right and left turn signal bulbs Remove the screws. replacement can be done in the same way. Remove the license plate light cover and the cover packing. Collar Pull out the bulb without turning.

  • Page 95: Blown Fuse

    Electrical Trouble Blown Fuse Blown Fuse Spare fuses Spare fuses Before handling fuses, see “Inspecting and Replacing Fuses.” P. 61 Fuse Box Fuses Remove the seat. P. 72 Open the fuse box cover. Pull the fuses out one by one with the Grom ABS type Grom fuse puller and check for a blown fuse.

  • Page 96: Unstable Engine Operation Occurs Intermittently

    Unstable Engine Operation Occurs Intermittently If the fuel pump filter is clogged, unstable engine operation will occur intermittently while riding. Even if this symptom occurs, you can continue to ride your vehicle. If unstable engine operation occurs even if sufficient fuel is available, have your vehicle inspected by your dealer as soon as possible.

  • Page 97: Information

    Vehicle Identification Number..... P. 102 Emission Control Systems ......P. 103 Catalytic Converter ......... P. 107 Oxygenated Fuels..........P. 108 Authorized Manuals ........P. 109 Warranty Coverage and Service ....P. 110 Honda Contacts ..........P. 112 Reporting Safety Defects ......P. 114...

  • Page 98: Keys

    Keys Keys Instruments, Controls, & Other Features Ignition Key Ignition Switch Be sure to record the key number provided with the key number plate. Store the spare key and Leaving the ignition switch in the ON position key number in a safe location. with the engine stopped will drain the battery.

  • Page 99: Trip Meter

    Instruments, Controls, & Other Features Tripmeter High Beam Indicator Each tripmeter resets to 0.0 when the trip The high beam indicator will come on briefly mileage exceeds 9,999.9. due to the capacitor being discharged when the ignition switch is turned to the ON position Document Bag immediately after the engine is stopped with the The owner's manual, registration, and insurance...

  • Page 100: Caring For Your Vehicle

    Frequent cleaning and polishing is important to Thoroughly rinse your vehicle with plenty of ensure the life of your Honda. A clean vehicle clean water and dry with a soft, clean cloth. makes it easier to spot potential problems.
  • Page 101 Caring for Your Vehicle Washing Precautions Do not direct water at the air cleaner: ● Water in the air cleaner can prevent the Follow these guidelines when washing: engine from starting. Do not use high-pressure washers: ● Do not direct water near the headlight: High-pressure water cleaners can ●...
  • Page 102 Caring for Your Vehicle Aluminum Components Exhaust Pipe and Muffler Aluminum will corrode from contact with dirt, If the exhaust pipe and muffler are painted, do mud, or road salt. Clean aluminum parts not use a commercially available abrasive regularly and follow these guidelines to avoid kitchen cleaning compound.

  • Page 103: Storing Your Vehicle

    Coat chrome pieces with rust-inhibiting oil. For more information about storage, Canada Lubricate the drive chain. P. 63 visit our website at www.honda.ca and look up ● Place your vehicle on a maintenance stand “Storage Tips” under the “Honda Warranty” in ●...

  • Page 104: Transporting Your Vehicle

    Transporting Your Vehicle Transporting Your Vehicle If your vehicle needs to be transported, it should be carried on a motorcycle trailer or a flatbed truck or trailer that has a loading ramp or lifting platform and motorcycle tie-down straps. Never try to tow your vehicle with a wheel or wheels on the ground.

  • Page 105: You & The Environment

    You & the Environment You & the Environment Recycle Wastes Put oil and other toxic wastes in approved Owning and riding a vehicle can be enjoyable, containers and take them to a recycling center. but you must do your part to protect the Call your local or state office of public works or environment.

  • Page 106: Vehicle Identification Number

    Vehicle Identification Number Vehicle Identification Number The VIN and engine serial number uniquely identify your vehicle and are required in order to register your vehicle. They may also be required when ordering replacement parts. You should record these numbers and keep them in a safe place.

  • Page 107: Emission Control Systems

    Your vehicle engine emits combustion Compliance with the terms of the byproducts, including carbon monoxide (CO), Distributor's Warranties for Honda Motorcycle oxides of nitrogen (NOx), and hydrocarbons Emission Control Systems is necessary in order (HC). Gasoline evaporation also emits to maintain a valid emissions system warranty.
  • Page 108 Emission Control Systems Ignition Timing Control System Noise Emission Requirements The ignition timing control system adjusts the The EPA requires that vehicles built after ignition timing to reduce the amount of HC, January 1, 1983, comply with applicable noise CO, and NOx produced. emission standards for one year or 3,730 miles (6,000 km) after the time of purchase when Catalytic Converters...
  • Page 109 Emission Control Systems Crankcase Emissions Control System Noise Emission Control System The engine is equipped with a closed crankcase TAMPERING WITH THE NOISE CONTROL system to prevent discharging crankcase SYSTEM IS PROHIBITED: emissions into the atmosphere. Blow-by gas is U. S. federal law prohibits, and Canadian returned to the combustion chamber through provincial laws may prohibit, the following acts the crankcase breather hose, air cleaner...
  • Page 110 Emission Control Systems AMONG THOSE ACTS PRESUMED TO Problems Affecting Vehicle Exhaust CONSTITUTE TAMPERING ARE THE Emissions FOLLOWING ACTS: Have your vehicle inspected and repaired by Removal of, or puncturing the muffler, ● your dealer if you experience any of the baffles, header pipes or any other following symptoms: component which conducts exhaust gases.

  • Page 111: Catalytic Converter

    A defective catalytic converter contributes to air riding and turn off the engine. Have your pollution and can impair your engine's vehicle serviced as soon as possible. performance. A replacement unit must be an original Honda part or equivalent.

  • Page 112: Oxygenated Fuels

    Oxygenated Fuels Oxygenated Fuels If you accidentally fill your fuel tank with an oxygenated fuel containing higher percentages, Some conventional fuels blended with alcohol you may experience performance problems. To or an ether compound are available in some resolve the problem, have your dealer drain the locales to help reduce emissions to meet clean fuel tank and replace with the correct fuel.

  • Page 113: Authorized Manuals

    Authorized Manuals Authorized Manuals These Honda manuals are written for the professional technician. However, if you possess The Service Manual used by your the proper tools, observe the safety standards, authorized dealer is available from your Honda and are mechanically capable, you should find dealer or Helm, Inc.

  • Page 114: Warranty Coverage And Service

    Service and deterioration associated with use of the vehicle. Coverage Your new Honda is covered by the following Your warranty coverage is not voided if you warranties: perform your own maintenance. However, Vehicle Limited Warranty ●...
  • Page 115 Warranty Coverage and Service authorized service provider caused damage to Statement on Warranty Coverage for another part of the vehicle otherwise covered Aftermarket and Recycled Parts under warranty before denying warranty The Magnuson-Moss Warranty Act, 15 U.S.C. s. coverage. Additionally, federal law allows a 2301 et seq., makes it illegal for motor vehicle manufacturer to void a motor vehicle warranty manufacturers to void a motor vehicle warranty...

  • Page 116: Honda Contacts

    4900 Marconi Drive your warranty coverage or the nature of the repair, Alpharetta, GA 30005-8847 talk to the Service Manager of your Honda dealer. If a misunderstanding occurs and you aren't Telephone: (866) 784-1870 satisfied with your dealer's handling of the...
  • Page 117 HondaCare Protection Plan to extend almost ® all of your warranty coverage. We will likely ask your Honda dealer to respond, or possibly acknowledge your comments Your Honda dealer can also supply information directly. about riding events and information about...

  • Page 118: Reporting Safety Defects

    However, NHTSA cannot become involved in individual problems between you, your dealer, or American Honda Motor Co., Inc.
  • Page 119 If you believe that your vehicle has a defect which could cause a crash or Mailing Address: could cause injury or death, you should Transport Canada - ASFAD immediately inform Honda Canada Inc. 330 Sparks Street and you may also inform Transport Ottawa, ON Canada.

  • Page 120: Specifications

    Specifications Main Components ■ Bore x stroke 1.97 x 2.48 in (50.0 x 63.1 mm) Overall length 69.3 in (1,760 mm) Compression 10.0 : 1 ratio Overall width 28.3 in (720 mm) Unleaded gasoline Overall height 40.0 in (1,015 mm) Fuel Recommended: 86 PON or higher Wheelbase...
  • Page 121 SAE 10W-30, JASO T 903 Vee Rubber V119C engine oil Front standard MA, Pro Honda GN4 4-stroke oil IRC NR77U Recommended (USA & Canada) or Honda 4-stroke oil, or Tires Vee Rubber V119C an equivalent motorcycle oil Rear IRC NR77U After draining 0.95 US qt (0.90 L)
  • Page 122 Specifications Bulbs ■ Headlight Brake light/Taillight Front turn signal / 12 V-21/5 W x 2 Position light Rear turn signal 12 V-21 W x 2 License plate light 12 V-5 W Fuses ■ Main fuse 15 A 10 A Grom Other fuse 15 A, 10 A Grom ABS type...
  • Page 123 Information Record Engine No. Color Label & Code Owner's Name Address City/State Phone Dealer's Name Address City/State Phone Service Manager...
  • Page 124 California Proposition 65 Warning WARNING: Operating, servicing and maintaining a passenger vehicle or off-highway motor vehicle can expose you to chemicals including engine exhaust, carbon monoxide, phthalates, and lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm.
  • Page 125 31K26C40 © 2025 Honda Motor Co., Ltd. 00X31-K26-C400 Printed in Thailand All Rights Reserved...

Table of Contents