Rear View Of The Product - ViewSonic VT2755LED User Manual

Getting Started

Rear View of the Product

Item
1 Power (AC input)
RS232 signal input
2
DVI signal input
3
4 SPDIF Optical output
USB
5
HDMI Input Terminal
6
7 S-Video input
Composite Video input
8
AV/ S-Video Audio
9
input (left/ right)
YPbPr signal Audio
10
input (left/ right)
11 YPbPr signal input
12 PC Audio input
13 VGA signal input
14 TV Input Jack
15 Headphone Jack
ViewSonic
Description
Plug-in the supplied AC Power cord and connect to the AC input power source.
This port is for the service technician's use.
Connect this port to the DVI output of PC device.
Connect this port to the SPDIF input of A/V device.
Connect to your USB devices, such as USB flash drive.
Connect this port to the HDMI output of PC device.
Connect the S-Video cable from the compatible device to this
connector on the rear panel of the LCD TV.
Connect this jack to the composite video output connectors on your A/V equip-
ment.
Connect the Audio in cable for AV/ S-Video from this jack to the corresponding
connectors on your A/V device.
Connect the Audio in cable for YPbPr from this jack to the
corresponding connectors on your A/V device.
Connect this port to the YPbPr output of A/V device.
Connect the RGB Audio Out on your computer to the RGB Audio on the rear of the
LCD TV.
Connect a 15-pin D-sub RGB cable to the RGB output of your
computer and the other end to the RGB input on the rear of the LCD TV.
Connect this jack to your Cable or VHF/UHF antenna.
Connect to your headphones. By connecting the headphones, you can listen to the
sound from the TV on headphones.
＊If you connect the headphones, the TV speakers will be muted.
6
VT2755LED