Sealey SMS2002C.V2 Manual

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions,
and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Refer to Wear protective
instruction gloves
manual
1. SAFETY
WARNING! Read all safety warnings, instructions, illustrations and specifications provided with this power tool. Failure to follow all
‰
instructions listed below may result in electric shock, fire and/or serious injury.
Save all warning and instructions for future reference.
9
1.1. ELECTRICAL SAFETY
WARNING! It is the user's responsibility to check the following:
‰
Check all electrical equipment and appliances to ensure that they are safe before using. Inspect power supply leads, plugs and
9
all electrical connections for wear and damage. Sealey recommend that an RCD (Residual Current Device) is used with all electrical
products.It is recomended the use of a RCD with a tripping current of 30mA or less.
Electrical safety information. It is important that the following information is read and understood:
Ensure that the insulation on all cables and on the appliance is safe before connecting it to the power supply.
9
Regularly inspect power supply cables and plugs for wear or damage and check all connections to ensure that they are secure.
9
Important: Ensure that the voltage rating on the appliance suits the power supply to be used and that the plug is fitted with the correct
9
fuse.DO NOT pull or carry the appliance by the power cable.
DO NOT pull the plug from the socket by the cable.
8
DO NOT use worn or damaged cables, plugs or connectors. Ensure that any faulty item is repaired or is replaced immediately by a
8
qualified electrician.
If the cable or plug is damaged during use, switch off the electricity supply and remove from use.
9
If the replacement of the supply cord is necessary, this has to be done by the manufacturer or his agent in order to avoid a safety
9
hazard.
Ensure that repairs are carried out by a qualified electrician.
1.2. GENERAL SAFETY
WARNING! Disconnect the saw blade sharpener from the mains power, and ensure that the cutting disc is at a complete standstill
‰
before attempting to service or perform any maintenance.
Maintain the saw blade sharpener in good condition (use an authorised service agent).
9
Replace or repair damaged parts. Use recommended parts only. Unauthorised parts may be dangerous and will invalidate the warranty.
9
Locate the cut-off machine in a suitable work area. Use two M8 bolts (not included) to bolt securely to the workbench through the two
9
1/4 holes on the base. Ensure that the surface is flat and capable of supporting the weight of the sharpener (see fig.1). Keep the area
clean and tidy and free from unrelated materials, and ensure that there is adequate lighting.
Keep the clean for best and safest performance and check moving parts alignment regularly.
9
WARNING! Before each use check that the cutting disc is secure and that it is not worn or damaged. Test the grinding wheel by running
‰
it for a minute prior to its use. NOTE: Only competant persons should attempt to change discs.
Ensure that replacement discs are not damaged in any way - cracks or deformations etc. Also check the mounting flanges to check that
9
they are not deformed, burred or chipped. DO NOT over tighten a disc and never tamper with a disc in order to adapt it to a different
size holder.
WARNING! Never operate the sharpener without the grinding wheel cover in place.
‰
Ensure that replacement grinding wheels meet the speed rating of the tool.
9
WARNING! This machine is designed to sharpen chain saw chains. DO NOT attempt to sharpen any other tools and DO NOT attempt
‰
to grind any other objects.
WARNING! Wear approved safety eye protection, ear defenders and gloves.
‰
Remove ill fitting clothing. Remove ties, watches, rings and other loose jewellery and contain long hair.
9
Maintain correct balance and footing. Ensure the floor is not slippery and wear non-slip shoes.
9
Keep children and unauthorised persons away from the work area.
9
Keep work area clean and well lit. Cluttered or dark area invites accidents
9
DO NOT operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools
8
create sparks which may ignite the dust or fumes.
Keep children and bystanders away whilst operating a power tool. Distractions can cause you to lose control.
9
Power tool plugs must match the outlet. Never modify the plug in any way.
9
DO NOT use any adaptor plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric
8
shock.
Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and refrigerators. There is an increased risk of
9
electric shock if your body is earthed or grounded.
© Jack Sealey Limited
BENCH MOUNTING CHAIN SAW SHARPENER 85W
MODEL NO:
Wear ear Wear eye
protection protection
Original Language Version
SMS2002C.V2
Wear Keep away
respiratory from rain
protection
Disconnect
from power
supply
SMS2002C.V2 Issue: 2 23/01/25