Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Welotec Alderamin MK5
Summary of Contents for Welotec Alderamin MK5
- Page 1 Alderamin Mk5 Version: v1.0.0 Date: 18.03.2025...
-
Page 2: Table Of Contents
Features ..........Alderamin MK5 & Alderamin MK5‑D CPU Options ...... -
Page 3: Copyright
Applications described in this manual are for illustration purposes only. We make no representation or guarantee that such applications will be suitable for the specified use without further testing or modification. Welotec GmbH www.welotec.com Zum Hagenbach 7 info@welotec.com... -
Page 4: Regulatory Compliances
Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. Welotec GmbH www.welotec.com Zum Hagenbach 7 info@welotec.com... -
Page 5: Iced-003 Issue 7 Verification Statement
This device complies with CAN ICES‑003 Issue 7 Class A. Operation is subject to the following two conditions: (1) This devicemay not cause harmful interference, and (2) this devicemust accept any interference received, including interference that may cause undesired operation. Welotec GmbH www.welotec.com Zum Hagenbach 7 info@welotec.com... -
Page 6: Safety Instructions
As a safety precaution, use a grounding wrist strap at all times. Place all electronic components in a static‑dissipative surface or static‑shielded bag when they are not in the chassis. Welotec GmbH www.welotec.com Zum Hagenbach 7 info@welotec.com... -
Page 7: Product Specifications
4 Product Specifications 4.1 Features The Alderamin MK5 Embedded System delivers high performance and versatility with the following key features: • Powerful Processing: Supports 14th Generation Intel® Core™ i9 / i7 / i5 / i3 processors. • Triple Display Support: Connect via HDMI, DisplayPort, and VGA for enhanced multi‑screen capabilities. -
Page 8: Technical Details
TDP: ‑40°C to 40°C MK5‑D with Internal Fans: 35W TDP: ‑20°C to 50°C 51~65W TDP: ‑20°C to ron‑ Tem‑ 45°C 71~80W TDP: ‑20°C to 40°C men‑ pera‑ Welotec GmbH www.welotec.com ture Zum Hagenbach 7 info@welotec.com Page 7 48366 Laer +49 2554 9130 00 Oper‑... -
Page 9: Important Notes
Incorrect RAID settings may cause system boot failure. PCIe GFX Card Installation Considerations • With a PCIe GFX card installed in Alderamin MK5‑D, BIOS setup will only support display output via the external graphics card. Storage Limitations for Dual‑Layer PCIe GFX Cards •... -
Page 10: Alderamin Mk5
4.5 Alderamin MK5 • Mechanical Dimensions: 268 mm x 246 mm x 108 mm • PCI Express x16 Slot Maximum Card Dimensions: – 111.15 x 200 x 18.7 mm (with mPCIe PoE Module) – 111.15 x 230 x 18.7 mm (without mPCIe PoE Module) 4.6 Alderamin MK5‑D... - Page 11 • Leadtek WinFast GTX1660 HURRICANE (6GB, 120W) Requires secondary 12V, 180W AC Adapter • Leadtek WinFast GTX1660 Ti HURRICANE (6GB, 120W) Requires secondary 12V, 180W AC Adapter Welotec GmbH www.welotec.com Zum Hagenbach 7 info@welotec.com Page 10 48366 Laer +49 2554 9130 00...
-
Page 12: Interfaces And Connections
5 Interfaces and Connections 5.1 Front I/O 5.2 Rear I/O 5.2.1 Alderamin MK5 Welotec GmbH www.welotec.com Zum Hagenbach 7 info@welotec.com Page 11 48366 Laer +49 2554 9130 00... -
Page 13: Expansion Module (Optional) Configuration Table
5.2.2 Alderamin MK5‑D Note: The recommended dimensions for a USB cable connector or device for USB 2.0 ports are 9mm height x 19mm width when all other I/O ports are occupied. However, compatibility also depends on the dimensions of the DisplayPort connector and other devices to avoid interference. -
Page 14: Recommended Poe Configuration And Environmental Spec Matrix
PoE ports (Max. 30W) x4 PoE ports (Max. 50W) x6 PoE ports (Max. 80W) x8 PoE ports (Max. 100W) x12 PoE ports (Max. 130W) Welotec GmbH www.welotec.com Zum Hagenbach 7 info@welotec.com Page 13 48366 Laer +49 2554 9130 00... -
Page 15: Dip Switch Settings And Pin Definitions
6 DIP Switch Settings and Pin Defini‑ tions 6.1 Jumper and Internal Connector Placement 6.1.1 Overall Layout Welotec GmbH www.welotec.com Zum Hagenbach 7 info@welotec.com Page 14 48366 Laer +49 2554 9130 00... -
Page 16: Dip Switch Settings
6.2 DIP Switch Settings Welotec GmbH www.welotec.com Zum Hagenbach 7 info@welotec.com Page 15 48366 Laer +49 2554 9130 00... -
Page 17: Internal Connector Pin Definition
6.3 Internal Connector Pin Definition 6.3.1 1st SATA Connector (Location J18) Welotec GmbH www.welotec.com Zum Hagenbach 7 info@welotec.com Page 16 48366 Laer +49 2554 9130 00... - Page 18 P13‑P15 +12V SATAHDR_TXP0_C SATAHDR_TXN0_C SATAHDR_RXN0_C SATAHDR_RXP0_C 6.3.2 SATA Power Headers (Location J19/J20 ‑ 2nd & 3rd SATA Power Headers) Signal Name VCC3 3‑4 6‑7 +12V Welotec GmbH www.welotec.com Zum Hagenbach 7 info@welotec.com Page 17 48366 Laer +49 2554 9130 00...
- Page 19 SATA Data Transmit (Negative) Ground SATAHDR_RXN_C SATA Data Receive (Negative) SATAHDR_RXP_C SATA Data Receive (Positive) Ground 6.3.4 Fan Header (Location J25) Signal Ground +12V CPU_FAN_TACH CPU_FAN_CTRL Welotec GmbH www.welotec.com Zum Hagenbach 7 info@welotec.com Page 18 48366 Laer +49 2554 9130 00...
-
Page 20: External Connector Pin Definitions
+12V 6.4 External Connector Pin Definitions 6.4.1 3‑Pin Terminal Block for DC Input Signal DC IN +9~48VIN 6.4.2 2‑Pin Terminal Block for Remote Power ON/OFF and Re‑ Welotec GmbH www.welotec.com Zum Hagenbach 7 info@welotec.com Page 19 48366 Laer +49 2554 9130 00... -
Page 21: Expansion Module Dio/Com
The DIO/COM module has a total of 4 COM ports. These ports can be configured as: • RS232 • RS422 • RS485 • Powered RS232 Welotec GmbH www.welotec.com Zum Hagenbach 7 info@welotec.com Page 20 48366 Laer +49 2554 9130 00... -
Page 22: Dip Switch Function
If the fixed COM port order driver is installed, the positions will be as follows: • 1st DIO/COM (Left Expansion Door) • 2nd DIO/COM (Right Expansion Door) 6.5.2 DIP Switch Function COM PID Selection Switch Welotec GmbH www.welotec.com Zum Hagenbach 7 info@welotec.com Page 21 48366 Laer +49 2554 9130 00... - Page 23 • Set B‑C: COM PID 0x1415 is determined by EEPROM (for 2nd MS‑48CDN‑DT10). PID and Driver Version Matrix Table Powered COM Enable Switch Powered COM Power Source Selection Switch Welotec GmbH www.welotec.com Zum Hagenbach 7 info@welotec.com Page 22 48366 Laer...
- Page 24 COM Mode Setting Switch Welotec GmbH www.welotec.com Zum Hagenbach 7 info@welotec.com Page 23 48366 Laer +49 2554 9130 00...
- Page 25 Driver Configuration Setting for RS485 Welotec GmbH www.welotec.com Zum Hagenbach 7 info@welotec.com Page 24 48366 Laer +49 2554 9130 00...
- Page 26 COM Port Pinout 6.5.3 Digital IO Port The DIO/COM module has a total 8‑bit GPIO, with the following positions: Welotec GmbH www.welotec.com Zum Hagenbach 7 info@welotec.com Page 25 48366 Laer +49 2554 9130 00...
- Page 27 ‑ ‑ Ground 6.5.4 Expansion Module PoE‑LAN M12 This module is a Giga LAN module supporting four M12‑type interfaces. Combined with a power module, it supports PoE (Type A). Welotec GmbH www.welotec.com Zum Hagenbach 7 info@welotec.com Page 26 48366 Laer...
- Page 28 M12 Code A LAN Module Pin Definitions Welotec GmbH www.welotec.com Zum Hagenbach 7 info@welotec.com Page 27 48366 Laer +49 2554 9130 00...
-
Page 29: Bios
– Www: Day of the week (Mon‑Sun) – mm: Month (1‑12) – dd: Day (1‑31) – yyyy: Year (1998‑9999) • System Time: Set using the format [hh:mm:ss], where: Welotec GmbH www.welotec.com Zum Hagenbach 7 info@welotec.com Page 28 48366 Laer +49 2554 9130 00... -
Page 30: Advanced Page
Super IO Configuration: Configure settings for system I/O controllers. • NCT6116D HW Monitor: Monitor system temperature, voltage, and fan speeds. • S5 RTC Wake Setting: Enable system wake‑up from S5 using an RTC alarm. Welotec GmbH www.welotec.com Zum Hagenbach 7 info@welotec.com Page 29... -
Page 31: Onboard Devices Configuration
SATA Mode Selection: Defines how the SATA controller operates (AHCI or Intel RST Premium). • Wake on LAN: Enable or disable system wake‑up on network activity. • HD Audio: Enable or disable high‑definition audio detection. Welotec GmbH www.welotec.com Zum Hagenbach 7 info@welotec.com Page 30... -
Page 32: Cpu Configuration
Cache Levels: Displays information about L1, L2, and L3 caches. • VMX Support: Indicates whether Virtual Machine Extensions (VMX) are supported. • Intel Trusted Execution Technology: Allows enabling or disabling of Intel’s security extensions. Welotec GmbH www.welotec.com Zum Hagenbach 7 info@welotec.com Page 31... -
Page 33: Trusted Computing
• Firmware Version: Shows the TPM firmware version. • Vendor Information: Displays the TPM manufacturer. • Security Device Support: Enable or disable TPM functionality within the BIOS. Welotec GmbH www.welotec.com Zum Hagenbach 7 info@welotec.com Page 32 48366 Laer +49 2554 9130 00... -
Page 34: Watchdog Configuration
7.5 WatchDog Configuration • WatchDog Timer: Enable or disable the WatchDog timer to automatically reset the system if it becomes unre‑ sponsive. Welotec GmbH www.welotec.com Zum Hagenbach 7 info@welotec.com Page 33 48366 Laer +49 2554 9130 00... -
Page 35: Super Io Configuration
7.6 Super IO Configuration • Serial Port Configuration: Configure RS232, RS485, and RS422 settings. • GPIO Settings: Manage digital I/O configurations. 7.7 Hardware Monitoring Welotec GmbH www.welotec.com Zum Hagenbach 7 info@welotec.com Page 34 48366 Laer +49 2554 9130 00... -
Page 36: Rtc Wake Setting
• Voltage Readings: Shows system voltage levels for various components. 7.8 RTC Wake Setting • Enable System Wake‑Up from S5 Using RTC Alarm: Allows setting a scheduled power‑on time. Welotec GmbH www.welotec.com Zum Hagenbach 7 info@welotec.com Page 35 48366 Laer... -
Page 37: Network Stack Configuration
7.9 Network Stack Configuration • Enable UEFI Network Boot: Toggle network boot functionality. Welotec GmbH www.welotec.com Zum Hagenbach 7 info@welotec.com Page 36 48366 Laer +49 2554 9130 00... -
Page 38: Nvme Configuration
7.10 NVMe Configuration • Configure NVMe Storage Devices: View and manage NVMe drives. Welotec GmbH www.welotec.com Zum Hagenbach 7 info@welotec.com Page 37 48366 Laer +49 2554 9130 00... -
Page 39: Security Page
Administrator Password: Set or modify the administrator password. • User Password: Set or modify the user password. • Secure Boot: Enable or disable Secure Boot to enforce signed OS loaders. Welotec GmbH www.welotec.com Zum Hagenbach 7 info@welotec.com Page 38 48366 Laer... -
Page 40: Secure Boot Configuration
7.11.1 Secure Boot Configuration • Secure Boot Mode: Choose between Standard and Custom configurations. • Restore Factory Keys: Reset Secure Boot keys to default factory settings. Welotec GmbH www.welotec.com Zum Hagenbach 7 info@welotec.com Page 39 48366 Laer +49 2554 9130 00... -
Page 41: Boot Page
7.12 Boot Page • Setup Prompt Timeout: Set the time (in seconds) for the BIOS prompt to appear before boot. • Boot Order Configuration: Define the sequence of boot devices. Welotec GmbH www.welotec.com Zum Hagenbach 7 info@welotec.com Page 40 48366 Laer... -
Page 42: Save & Exit
Save Changes and Reset: Apply changes and restart the system. • Discard Changes and Reset: Restart without saving any modifications. • Load Optimized Defaults: Restore factory default settings for all BIOS configurations. Welotec GmbH www.welotec.com Zum Hagenbach 7 info@welotec.com Page 41... -
Page 43: System Setup
8 System Setup This chapter provides guidance on setting up the Alderamin MK5 Embedded System hardware. Warning: The edges of the ALDERAMIN MK5 aluminum extrusion fins are sharp. Handle the unit carefully during installation, movement, and operation. 8.1 1st 2.5” SATA HDD/SSD Installation Follow these steps to install a SATA HDD: •... -
Page 44: 2Nd And 3Rd 2.5" Sata Hdd/Ssd Installation
Insert the HDD/SSD tray back into the main chassis and fasten the screws on the door. Note: Keep the unit horizontal to facilitate smooth reinsertion of the HDD tray. 8.2 2nd and 3rd 2.5” SATA HDD/SSD Installation • Remove the GND screws from the rear bezel. Welotec GmbH www.welotec.com Zum Hagenbach 7 info@welotec.com Page 43... - Page 45 • Loosen the four HDD bracket screws and pull the bracket out of the unit. • Secure the 2nd and 3rd HDD/SSD to the bracket as illustrated in the concept drawing. Welotec GmbH www.welotec.com Zum Hagenbach 7 info@welotec.com Page 44...
- Page 46 • Fasten the four bracket screws to the main unit. • Follow the guide for proper SATA cable routing. Welotec GmbH www.welotec.com Zum Hagenbach 7 info@welotec.com Page 45 48366 Laer +49 2554 9130 00...
-
Page 47: Cpu, Cpu Heatsink, And Dram Installation
8.3 CPU, CPU Heatsink, and DRAM Installation • Remove the GND screws from the rear bezel. • Remove the bottom cover. Welotec GmbH www.welotec.com Zum Hagenbach 7 info@welotec.com Page 46 48366 Laer +49 2554 9130 00... - Page 48 Warning: The aluminum and metal edges are sharp—handle with extreme caution when pulling the main chas‑ sis out. • Take the CPU passive cooler from the accessories and install the CPU, CPU heatsink, and DRAM modules as shown. Welotec GmbH www.welotec.com Zum Hagenbach 7 info@welotec.com Page 47...
-
Page 49: Rtc Battery Maintenance
8.4.1 Preparation for Disassembly Flathead Screwdriver (Required for battery removal due to high vibration resistance design) • Insert the flathead screwdriver into the gap on one side of the RTC battery vertically. Welotec GmbH www.welotec.com Zum Hagenbach 7 info@welotec.com Page 48... - Page 50 • Rotate the screwdriver about 45 degrees to loosen and remove the coin battery. Welotec GmbH www.welotec.com Zum Hagenbach 7 info@welotec.com Page 49 48366 Laer +49 2554 9130 00...
Need help?
Do you have a question about the Alderamin MK5 and is the answer not in the manual?
Questions and answers