1. Manuals
  2. Brands
  3. Welotec Manuals
  4. Industrial PC
  5. Alderamin MK3
  6. Manual

Welotec Alderamin MK3 Manual

Hide thumbs Also See for Alderamin MK3:
Table of Contents

Advertisement

Quick Links

Download this manual
Alderamin MK3
Version:
v1.0.0
Date:
27.11.2024

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Alderamin MK3 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Welotec Alderamin MK3

Summary of Contents for Welotec Alderamin MK3

  • Page 1 Alderamin MK3 Version: v1.0.0 Date: 27.11.2024...

  • Page 2: Table Of Contents

    Features ..........Alderamin MK3 & Alderamin MK3‑D CPU Options ......

  • Page 3: Introduction

    I/O placement. 1.1 Overview Welotec’s ALDERAMIN MK3 embedded system is the next generation embedded system with Intel® Coffee Lake C246 workstation chipset which can support Xeon and Core‑i LGA1151 socket type processor. The excellent performance, powerful processor, OCP/OVP power protection, and expandable design provide the solution for every complicated task and most types of application.

  • Page 4: Hardware Specification

    (USB / PCIe / SATA), w/ SIM Card Holder Wireless: M.2 2230 E key (PCIe / USB) a. PCIe 3.0 x16 (ALDERAMIN sion MK3) b. PCIe 3.0 x16 + PCIe 3.0 x1 (ALDERAMIN MK3‑D Default) c. PCIe 3.0 x8 + PCIe 3.0 x8 (ALDERAMIN Slot MK3‑D Option)
  • Page 5 Fan (External System Fan Kit as Option in Accessories) Mounting Wall mount Dimen‑ a. ALDERAMIN MK3: 10.6” x 9.7” x 4.3” (268 mm x 246 mm x 108 mm) b. ALDERAMIN MK3‑D: 10.6” sion x 9.7” x 5” (268 mm x 246 mm x 128 mm) Material...
  • Page 6 71~80W TDP Processor: ‑20°C to 45°C (with 0.7m/s Air Flow and Wide Temperature Memory/Storage) d. ALDERAMIN MK3‑D Fan Design, for Nvidia 70W T4 and 75W P4 Card, add Internal 40x28 System Fan x 2: 35~80W TDP Processor: ‑20°C to 50°C (with 0.7m/s Air Flow and Wide Temperature Memory/Storage) Op‑...
  • Page 7 Replace only with the same or equivalent type recommended by manufacturer. Dispose of used battery according to manufacturer instructions and in accordance with your local regulations. *Note^6^: The following configurations in ultimate use might cause system shut down unexpectedly. Welotec GmbH www.welotec.com Zum Hagenbach 7 info@welotec.com...
  • Page 8 *Note^9^: When ALDERAMIN MK3‑D is installed with dual layer PCIe GFX card, it can only be installed with 1 internal HDD/SSD (not include removable HDD/SSD) instead of 2 due to mechanical limitation.

  • Page 9: Mechanical Specification

    1.5 Mechanical Specification 1.5.1 ALDERAMIN MK3 • Mechanical Dimension: 268 mm x 246 mm x 108 mm • PCI Express x16 Slot Maximum Card Dimension: – 111.15 x 200 x 18.7mm with mPCIe PoE Module – 111.15 x 230 x 18.7mm w/o mPCIe PoE Module 1.5.2 ALDERAMIN MK3‑D...

  • Page 10: System I/O Placement

    1.6 System I/O Placement • Front I/O: Welotec GmbH www.welotec.com Zum Hagenbach 7 info@welotec.com Page 9 48366 Laer +49 2554 9130 00...
  • Page 11 • Rear I/O (ALDERAMIN MK3): • Rear I/O (Alderamin‑MK3D): *Notes: The recommended dimension of USB cable connector or device for USB2.0 ports is 9mm height x 19mm width when all the other I/O ports are occupied. It still needs to depend on the DisplayPort connector and other devices’...
  • Page 12 Function COM/DIO 4x COM, 8x DIO PoE RJ45 4x Gigabit PoE RJ45 PoE M12 4x Gigabit PoE M12 Ignition Control DualLAN 2x Gigabit LAN RJ45 Welotec GmbH www.welotec.com Zum Hagenbach 7 info@welotec.com Page 11 48366 Laer +49 2554 9130 00...

  • Page 13: Recommended Poe Configuration And Environmental Spec Matrix

    4 port PoE (Max. 100% 50W) x 6 port PoE (Max. 100% 80W) x 8 port PoE (Max. 100% 100W) x 10 port PoE (Max. 100% 130W) Welotec GmbH www.welotec.com Zum Hagenbach 7 info@welotec.com Page 12 48366 Laer +49 2554 9130 00...

  • Page 14: Regulatory Compliances

    Railway Applications • EN 50155:2017 • IEC 61373:2010 • EN 50121‑3‑2:2016 Environmental Testing • IEC 60068‑2‑1:2017 • IEC 60068‑2‑2:2017 • IEC 60068‑2‑30:2005 Fire Hazard Testing Welotec GmbH www.welotec.com Zum Hagenbach 7 info@welotec.com Page 13 48366 Laer +49 2554 9130 00...
  • Page 15 • EN60695‑2‑11:2014 Welotec GmbH www.welotec.com Zum Hagenbach 7 info@welotec.com Page 14 48366 Laer +49 2554 9130 00...

  • Page 16: Dip Switch Settings And Pin Definition

    3 DIP Switch settings and pin defini‑ tion This chapter provides information about how to set up the dip switch, and use internal I/Os of ALDERAMIN MK3 Embedded System hardware. 3.1 Jumper and Internal Connector Overall Place‑ ment Welotec GmbH www.welotec.com...

  • Page 17: Dip Switch Setting

    Mini PCIe Slot 1 PCIE X1 3rd SATA Signal Header 3rd SATA Power Header 3.2 DIP Switch Setting • Location #G Signal ATX mode Down AT mode Welotec GmbH www.welotec.com Zum Hagenbach 7 info@welotec.com Page 16 48366 Laer +49 2554 9130 00...

  • Page 18: Internal Connector Pin Definition

    Switch setting Mode 1‑2 → COM 1 Switch setting Mode 3‑4 → COM 2 3.3 Internal Connector Pin Definition 3.3.1 Location #Q ‑ 1^st^ SATA Connector Welotec GmbH www.welotec.com Zum Hagenbach 7 info@welotec.com Page 17 48366 Laer +49 2554 9130 00...
  • Page 19 VCC3 VCC3 VCC3 +12V +12V +12V SATAHDR_TXP0_C SATAHDR_TXN0_C SATAHDR_RXN0_C SATAHDR_RXP0_C 3.3.2 Location #O/#Y ‑ 2^nd^ and 3^rd^ SATA Power Header Signal Name VCC3 +12V +12V Welotec GmbH www.welotec.com Zum Hagenbach 7 info@welotec.com Page 18 48366 Laer +49 2554 9130 00...
  • Page 20 SATAHDR_TXN_C SATA DATA Transmit(negative) Ground SATAHDR_RXN_C SATA DATA Receive(negative) SATAHDR_RXP_C SATA DATA Receive(positive) Ground 3.3.4 Location #P – Fan Header Signal Ground +12V CPU_FAN_TACH CPU_FAN_CTRL Welotec GmbH www.welotec.com Zum Hagenbach 7 info@welotec.com Page 19 48366 Laer +49 2554 9130 00...
  • Page 21 3.3.5 Location #H – M.2 Key E Slot Welotec GmbH www.welotec.com Zum Hagenbach 7 info@welotec.com Page 20 48366 Laer +49 2554 9130 00...
  • Page 22 3.3.6 Location #S – M.2 Key M Slot Welotec GmbH www.welotec.com Zum Hagenbach 7 info@welotec.com Page 21 48366 Laer +49 2554 9130 00...

  • Page 23: External Connector Pin Definition

    3.3.8 Location #J/#K – 5V Power Header for Reservation Signal Ground 3.4 External Connector Pin Definition 3.4.1 3‑pin terminal block for DC Input Signal DC IN +9~48VIN Ignition (IGN) Welotec GmbH www.welotec.com Zum Hagenbach 7 info@welotec.com Page 22 48366 Laer +49 2554 9130 00...
  • Page 24 3.4.2 4‑pin Terminal Block for PWM Fan Signal Ground +12V System_FAN_TACH SYSTEM_FAN_CTRL 3.4.3 2‑pin Terminal Block for Remote Power ON/OFF and Re‑ Signal Ground EXT Reset Ground EXT_PWRBT_ON/OFF Welotec GmbH www.welotec.com Zum Hagenbach 7 info@welotec.com Page 23 48366 Laer +49 2554 9130 00...
  • Page 25 3.4.4 COM#1 / COM#2 Welotec GmbH www.welotec.com Zum Hagenbach 7 info@welotec.com Page 24 48366 Laer +49 2554 9130 00...

  • Page 26: Expansion Module Com/Dio

    Dip Switch Function (1) COM ID selection switch Set A‑B; COM ID is determined by UART controller (default). Set B‑C; COM ID is deter‑ mined by EEPROM. (2) Powered COM enable switch Welotec GmbH www.welotec.com Zum Hagenbach 7 info@welotec.com Page 25...
  • Page 27 (3) Powered COM power source selection switch (4) COM Mode setting switch Welotec GmbH www.welotec.com Zum Hagenbach 7 info@welotec.com Page 26 48366 Laer +49 2554 9130 00...

  • Page 28: Digital Io Port

    It has total 8‑bit GPIO, the position is as follows. 3.6 Expansion Module LAN This Module is a Giga LAN module, which supports four M12 type interfaces. 3.6.1 M12 Code A LAN Module Pin definitions Welotec GmbH www.welotec.com Zum Hagenbach 7 info@welotec.com...

  • Page 29: Expansion Module Ign

    Input power selection switch Common car power supplies are DC 12V or 24V. Please set it according to your environment. c. Delay Power On/Off Setting Switch This feature detects the ignition signal status and allows users to control the on/off delay time setting through DIP switch. Welotec GmbH www.welotec.com Zum Hagenbach 7 info@welotec.com...

  • Page 30: System Setup

    4 System Setup This chapter provides information on setting up the ALDERAMIN MK3 Embedded System hardware. Warning: The edge of the ALDERAMIN MK3 aluminum extrusion fins is sharp. Please be careful when moving the unit, installing it, and operating the embedded system! 4.1 2.5”...
  • Page 31 • Fasten the screws to secure the HDD/SSD to the bracket. • Insert the HDD/SSD tray back into the main chassis and fasten the screws on the door. Welotec GmbH www.welotec.com Zum Hagenbach 7 info@welotec.com Page 30 48366 Laer +49 2554 9130 00...

  • Page 32: 2Nd And 3Rd 2.5" Sata Hdd/Ssd Installation

    • Remove the GND screws from the rear bezel. • Remove the bottom cover. • Loosen the four HDD bracket screws and pull the bracket out of the unit. Welotec GmbH www.welotec.com Zum Hagenbach 7 info@welotec.com Page 31 48366 Laer...
  • Page 33 • Secure the 2nd and 3rd HDD/SSD to the bracket as shown in the concept drawing. • Fasten the four bracket screws to the main unit. Welotec GmbH www.welotec.com Zum Hagenbach 7 info@welotec.com Page 32 48366 Laer +49 2554 9130 00...

  • Page 34: Cpu/Cpu Heatsink/Dram Installation

    • Follow the drawing to route the SATA cables. 4.3 CPU/CPU Heatsink/DRAM Installation • Remove the GND screws from the rear bezel. Welotec GmbH www.welotec.com Zum Hagenbach 7 info@welotec.com Page 33 48366 Laer +49 2554 9130 00...
  • Page 35 (L6) and two guide pins on the aluminum extrusion, so you will need to apply force to pull it out. Warning: Be very careful of the sharp edges of the aluminum and metal parts when pulling the main chassis out. Welotec GmbH www.welotec.com Zum Hagenbach 7 info@welotec.com...
  • Page 36 • Take the CPU passive cooler from the accessories and install the CPU, CPU heatsink, and DRAM modules as shown in the picture. Welotec GmbH www.welotec.com Zum Hagenbach 7 info@welotec.com Page 35 48366 Laer +49 2554 9130 00...

  • Page 37: Rtc Battery Maintenance

    • Insert the flathead screwdriver into the gap on one side of the RTC battery vertically. • Rotate the screwdriver about 45 degrees to loosen the coin battery. Welotec GmbH www.welotec.com Zum Hagenbach 7 info@welotec.com Page 36...

  • Page 38: External Fan (Optional) Installation Guide

    • Align the edge of the external fan bracket with the green arrows, and align the metal latch with the red arrow direction. Then insert the fan into the center of the housing. Welotec GmbH www.welotec.com Zum Hagenbach 7 info@welotec.com...
  • Page 39 Tighten the thumbscrews to secure the external fan and connect the 4‑pin cable to the PWM fan connector on the rear I/O. Note: Do not operate the system when it is powered on. Improper installation of the external system fan bracket with the system powered on may cause injury. Welotec GmbH www.welotec.com Zum Hagenbach 7 info@welotec.com...

  • Page 40: Bios Setup

    5 BIOS Setup This chapter provides information about how to set up BIOS and use BIOS menu items to adjust basic function settings. 5.1 Main Page Welotec GmbH www.welotec.com Zum Hagenbach 7 info@welotec.com Page 39 48366 Laer +49 2554 9130 00...
  • Page 41 12 dd: 1‑31 yyyy: 1998‑9999 tween Date elements. System [hh/mm/ss] hh: 0‑23 mm: 0‑59 ss: 0‑59 Set the Time. Use Tab to switch be‑ Time tween Time elements. Welotec GmbH www.welotec.com Zum Hagenbach 7 info@welotec.com Page 40 48366 Laer +49 2554 9130 00...

  • Page 42: Advanced Page

    S5 RTC Wake Setting Enable System to wake from S5 using RTC alarm Network Stack Configuration Network Stack Settings NVMe Configuration NVMe Device Options Settings Welotec GmbH www.welotec.com Zum Hagenbach 7 info@welotec.com Page 41 48366 Laer +49 2554 9130 00...

  • Page 43: Onboard Device

    5.2.1 Onboard Device Welotec GmbH www.welotec.com Zum Hagenbach 7 info@welotec.com Page 42 48366 Laer +49 2554 9130 00...
  • Page 44 Enable HD Audio Disabled / [Enabled] Control Detection of the HD‑Audio device. Disable = HAD will be unconditionally disabled Enabled = HAD will be unconditionally enabled. Welotec GmbH www.welotec.com Zum Hagenbach 7 info@welotec.com Page 43 48366 Laer +49 2554 9130 00...

  • Page 45: Cpu Configuration

    5.2.2 CPU Configuration Welotec GmbH www.welotec.com Zum Hagenbach 7 info@welotec.com Page 44 48366 Laer +49 2554 9130 00...
  • Page 46 [Enabled] / Enables utilization of additional hardware capabilities provided by Intel® ecution Technol‑ Disabled Trusted Execution Technology. Changes require a full power cycle to take effect. Welotec GmbH www.welotec.com Zum Hagenbach 7 info@welotec.com Page 45 48366 Laer +49 2554 9130 00...

  • Page 47: Trusted Computing

    Pending [None] Schedule an Operation for the Security Device. NOTE: Your Computer will reboot operation TPM Clear during restart in order to change State of Security Device. Welotec GmbH www.welotec.com Zum Hagenbach 7 info@welotec.com Page 46 48366 Laer +49 2554 9130 00...
  • Page 48 5.2.4 WatchDog WatchDog Value WatchDog Configuration WatchDog [Disabled] / Enabled Enables or Disables WatchDog function. Welotec GmbH www.welotec.com Zum Hagenbach 7 info@welotec.com Page 47 48366 Laer +49 2554 9130 00...

  • Page 49: Super Io Configuration

    5.2.5 Super IO Configuration Welotec GmbH www.welotec.com Zum Hagenbach 7 info@welotec.com Page 48 48366 Laer +49 2554 9130 00...
  • Page 50 IO=2E0h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12 IO Device Mode Con‑ [RS232] / RS485 / RS422 Configure se‑ figuration rial port RS232/RS422/RS485. Welotec GmbH www.welotec.com Zum Hagenbach 7 info@welotec.com Page 49 48366 Laer +49 2554 9130 00...
  • Page 51 5.2.6 NCT6116D HW Monitor Welotec GmbH www.welotec.com Zum Hagenbach 7 info@welotec.com Page 50 48366 Laer +49 2554 9130 00...
  • Page 52 Fan_Internal Speed System xx RPM Fan_External Speed VCORE xx V PCH IO volt xx V System Mem‑ xx V AVSB xx V VSB3V xx V Welotec GmbH www.welotec.com Zum Hagenbach 7 info@welotec.com Page 51 48366 Laer +49 2554 9130 00...
  • Page 53 Fixed Fixed Time / will wake on the hr::min::sec specified. Select DynamicTime , System will Time from S5 Dynamic Time wake on the current time + Increase minute(s) Welotec GmbH www.welotec.com Zum Hagenbach 7 info@welotec.com Page 52 48366 Laer +49 2554 9130 00...

  • Page 54: Network Stack Configuration

    5.2.8 Network Stack Configuration Network Stack Configuration Value Network Stack Settings Network Stack [Disabled] / Enabled Enable/Disable UEFI Network Stack Welotec GmbH www.welotec.com Zum Hagenbach 7 info@welotec.com Page 53 48366 Laer +49 2554 9130 00...

  • Page 55: Nvme Configuration

    5.2.9 NVMe Configuration Welotec GmbH www.welotec.com Zum Hagenbach 7 info@welotec.com Page 54 48366 Laer +49 2554 9130 00...

  • Page 56: Security Page

    User Password xxxx Set User Password HDD Security drive(EX: xxxxxxxxxxxxx) HDD Security Configuration for selected drive Secure Boot Secure Boot configuration BIOS Update BIOS Update support Welotec GmbH www.welotec.com Zum Hagenbach 7 info@welotec.com Page 55 48366 Laer +49 2554 9130 00...

  • Page 57: Secure Boot

    Force System to User Mode. Install factory default Secure Boot key database Factory Keys Reset [Yes] / No Delete all Secure Boot key databases from NVRAM Setup Mode Welotec GmbH www.welotec.com Zum Hagenbach 7 info@welotec.com Page 56 48366 Laer +49 2554 9130 00...
  • Page 58 Welotec GmbH www.welotec.com Zum Hagenbach 7 info@welotec.com Page 57 48366 Laer +49 2554 9130 00...
  • Page 59 (DER) c)EFI_CERT_RSA2048 Update (bin) d)EFI_CERT_SHAXXX 2.Authenticated UEFI Variable 3. EFI PE/COFF Im‑ Append age(SHA256) Key Source: Factory, External,Mixed Delete Welotec GmbH www.welotec.com OsRe‑ [Details] Enroll Factory Defaults or load certificates from a file: 1.Public Key Certifi‑ Zum Hagenbach 7 info@welotec.com...

  • Page 60: Bios Update

    5.3.2 BIOS Update Welotec GmbH www.welotec.com Zum Hagenbach 7 info@welotec.com Page 59 48366 Laer +49 2554 9130 00...

  • Page 61: Boot Page

    5.4 Boot Page Welotec GmbH www.welotec.com Zum Hagenbach 7 info@welotec.com Page 60 48366 Laer +49 2554 9130 00...
  • Page 62 Disable Boot Optoin USB Floppy / CD/DVD / USB CD/DVD / Hard Sets the system boot orfer Disk / USB Key / USB Hard Disk / [Network] / Disable Welotec GmbH www.welotec.com Zum Hagenbach 7 info@welotec.com Page 61 48366 Laer...
  • Page 63 Reset the system after saving the changes. Discard Changes and Reset Reset system setup without saving any changes. Load Optimized Defaults Restore/Load Default values for all the setup options. Welotec GmbH www.welotec.com Zum Hagenbach 7 info@welotec.com Page 62 48366 Laer...

  • Page 64: Ce Declaration Of Conformity

    6 CE Declaration of Conformity Welotec GmbH www.welotec.com Zum Hagenbach 7 info@welotec.com Page 63 48366 Laer +49 2554 9130 00...
  • Page 65 Welotec GmbH www.welotec.com Zum Hagenbach 7 info@welotec.com Page 64 48366 Laer +49 2554 9130 00...
  • Page 66 Welotec GmbH www.welotec.com Zum Hagenbach 7 info@welotec.com Page 65 48366 Laer +49 2554 9130 00...
  • Page 67 Download here Welotec GmbH www.welotec.com Zum Hagenbach 7 info@welotec.com Page 66 48366 Laer +49 2554 9130 00...

Table of Contents