Sanyo DP42861 User Manual page 4

____________________
SETTING UP TO YOUR HOME NETWORK
WIRELESS LAN CONNECTION
(CONTINUED)
WPS ______________________________________________
WPS (Push Button)
If your Access Point has the Push Button feature, select the
WPS (Push Button) option and press ENTER.
Follow the on-screen instructions to enable and search for the
"activated" Access Point.
WPS with HDTV's PIN
Use this option if you need to enter the HDTV's PIN into the
Access Point you wish to connect to.
CONNECT SCREEN
Follow the on-screen instructions to connect to the desired
Access Point.
WPS with Access Point's PIN
Select this option to search for an available Access Point from
your LAN.
Choose the desired Access Point, if the AP is protected
(locked) you will need to enter its PIN using the remote's
NUMERIC keys.
NOTE: The Access Point with stronger signal appears higher
in the list.
WPS SCREEN
Follow the on-screen instructions to connect to the desired
Access Point.
ADVANCED SETUP
The Advanced Setup menu allows the user to manually enter
the values for IP Address, Subnet Mask, Default Gateway, and
DNS Server.
Press the MENU key to open up the on-screen menu.
Use the CURSORLM keys to select the Setup option from the
main menu and press ENTER.
NETWORK SCREEN
Select the Network option and press ENTER.
Select the Advanced Setup option and press ENTER.
Choose the setting you wish to adjust and press ENTER.
Use the remote control's NUMERIC keys to enter the desired
value.
Select Apply Setup and press ENTER to establish a connec-
tion using the applied values.
ADVANCED SETUP (MANUAL) SCREEN *
* Sample values used as reference only
4
www.sanyoctv.com
Need help? 1-877-864-9604