Sony TCS-2000 Service Manual

SPECIFICATIONS
Recording system 4-track 2-channel stereo
Speaker Approx. 6.6 cm (2 5/g inches) x 3.8cm (1 '/2
inches)
Frequency response 100-10,000 Hz
Input Microphone input jack (PLUG IN POWER)
(stereo minijack)
sensitivity 0.3 mV (— 68 dB)
for 3 kilonms or lower impedance microphone
Output Headphones output jack (stereo minijack)
load impedance 8 to 300 ohms
Power output Headphones: 6mW + 6mW (16 ohms, at 10%
harmonic distortion)
Speaker: 230 mW (at 10% harmonic distortion)
Power requirements 6V DC, four size AA (R6) batteries
DC IN 6V jack accepts:
optional Sony AC-D4M AC power adaptor for
use on 120V AC, 60Hz
optional Sony DCC-127A car battery cord for use
on 12V car battery
Battery life (hours)
Batteries | Recording Playback Playback
| (speaker) (headphones)
Sony alkaline A 5 A 5 A 55
battery AM3(N) pprox. pprox. pprox. 5 .
For maximum performance, we recommend
the use of alkaline batteries.
Dimensions Approx. 131 x 42.2 x 202.8mm (w/h/d)
(54a x 1he x 8 inches)
incl. projecting parts and controls
Weight Approx. 700g (1 1b 9 02) incl. batteries, not
incl. other accessories
Supplied accessory Carrying case (1)
Optional accessories AC power adaptor AC-D4M
Car battery cord DCC-127A
Electret condenser stereo microphone ECM-202
Stereo headphones MDR-A10L
Head demagnetizer HE-5C
Head cleaner KK-31
Foot switch FS-10A
Your dealer may not handle some of the above listed optional
accessories. Please ask the dealer for detailed information
about the optionalaccessories available in your country.
Design and specifications subject to change without notice.
MICROFILM
US Model
Canadian Model
AEP Model
UK Model
E Model
New
MT-2000-61
Model Name Using Similar Mechasism
Tape Transport Mechanism Type
Note: Use only the recommended AC power adaptor or car battery cord
manufactured by Sony. Polarity of the plugs of other manufacturers
may be different.
7
e
polarity of the Sony plug
FEATURES
¢ Sound scan function plays back recorded material at
approximately 1/4th the time spent for recording, by skipping
parts of the contents at certain intervals. This function allows
you to quickly check what is recorded on the tape.
Cue marker marks an inaudible cue marker signal at a
desired position of the tape during recording. Auto stop
function quickly locates the cue marker position while
playing back.
Stereo recording. Stereo playback is possible with optional
stereo headphones.
NOISE REDUCTION switch decreases tape hiss.
STEREO CASSETTE CORDER
SONY.