Advertisement
Quick Links
Securam Deadbolt Electronic Lock
Installation and Operations
is instruction applies to kit part numbers
06100-06085 and 06100-06086
©2023 Triton Systems of Delaware, LLC. All Rights Reserved. ATMGurus®, the ATMGurus logo and tag-
line, Triton®, and the Triton logo are all registered trademarks of Triton Systems of Delaware, LLC. e third
party trademarks that may be identi ed herein are the trademark of their respective owners. Triton disclaims any
affi liation, connection, or association between its products and services, and those of the respective trademark
owners, or any sponsorship or approval of its products and services by such trademark owners.
Triton Systems ©
TDN 07103-00470
Rev: B
Advertisement
Related Manuals for Triton 06100-06085
Summary of Contents for Triton 06100-06085
- Page 1 ©2023 Triton Systems of Delaware, LLC. All Rights Reserved. ATMGurus®, the ATMGurus logo and tag- line, Triton®, and the Triton logo are all registered trademarks of Triton Systems of Delaware, LLC. e third party trademarks that may be identi ed herein are the trademark of their respective owners. Triton disclaims any affi...
-
Page 2: Contact Information
is guide provides information for Triton Level 1 vaults with deadbolt locking system. is manual applies to all service personnel involved in installing, con guring, or upgrading Triton ATMs nationwide and abroad. is guide provides installation steps and setup for Securam Deadbolt lock. - Page 3 / - .................... / - .................... S L I .................... D ........................ L O ........................ ...................... A: L- L R ................. C L L- V: ................ E ..................... Triton Systems © TDN 07103-00470 Rev: B...
- Page 4 RL5 T-Handle/ 2-Piece Business Hour Cabinet RL5X2X Level 1 Vault FT5X2X Level 1 Vault RT2X2X Level 1 Vault ARGO Level 1 Vault before October 28, 2013 VersaSafe before March 3, 2022 NDU before June 17, 2021 Triton Systems © TDN 07103-00470 Rev: B...
- Page 5 Steel Pan Head Screw | External-Tooth Lock Washer | M4 x 0.7 thread | 02054-00365 12mm Kit Applies to these ATMs ARGO Level 1 Vault a er October 28, 2013 VersaSafe a er March 3, 2022 NDU a er June 17, 2021 ARGO FT Triton Systems © TDN 07103-00470 Rev: B...
- Page 6 2. Le Image, route the end of the cable through the spindle. Gently pull the cable through the spindle. 3. Center Image, insert the spindle into the Entry-pad base. 4. Right Image, insert cable and spindle through front side door opening. Image view is from inside door. Triton Systems © TDN 07103-00470 Rev: B...
- Page 7 DO NOT push the square sha through the front of the dial mounting plate. 9. Slowly pull the remaining cable through the lock body and press the lock body onto the square sha . Triton Systems © TDN 07103-00470 Rev: B...
- Page 8 13. With the cable through the center, install the two plastic protective holders, Le Image, into the lock body. YELLOW YELLOW Right Image, arrows. Place the cable in the body slot, Right Image, rectangle. YELLOW 14. Remove the two screws, Right Image, circles, and discard. Triton Systems © TDN 07103-00470 Rev: B...
- Page 9 (06100-06086, Item 2) with the metric M4 12mm screws (Item 4), double arrow. For lock bodies with the deadbolt on top, Right Image, attach the Bracket, Re-locker from kit (06100-06085, Item 2) with the YELLOW metric M4 12mm screws (Item 4), double arrow.
- Page 10 Recommend Action: 24. Position the data cable not to catch on the bolt-works during movement or Ty-wrap it to the bolt-works guide bar as shown in image. 25. Reinstall door panel if removed earlier. Triton Systems © TDN 07103-00470 Rev: B...
- Page 11 • A low battery causes a repeat 8 beeps during unlock operation Replace battery immediately. • Triton recommends (Duracell or Energizer) battery replaced annually. Programming Warning • Always perform operations with the safe lock system unlocked and the safe door open.
- Page 12 27. Right Image, remove the 6-screws, arrows, and remove the panel for later use. YELLOW 28. Le Image, remove two screws, double arrows, and remove the Re-locker Retainer bracket. 29. Right Image, read the Warning statement. Triton Systems © TDN 07103-00470 Rev: B...
- Page 13 BLUE 35. Right Image, remove the two screws, arrows. Remove the backer plate. BLUE 36. Remove the four screws, arrows. Remove the lock assembly and pull the at cable through opening. Triton Systems © TDN 07103-00470 Rev: B...
- Page 14 2-screws, arrows. Remove the cover for later use. RL/FT 5 VERSASAFE YELLOW 39. Le Image, remove two screws, arrows, and remove the Re-locker Retainer bracket. 40. Right Image, read the Warning statement. Triton Systems © TDN 07103-00470 Rev: B...
- Page 15 46. Right Image, remove the two screws, arrows. Remove the backer plate. BLUE 47. Remove the four screws, arrows. Remove the lock assembly and pull the at cable through opening. E C L : Triton Systems © TDN 07103-00470 Rev: B...
- Page 16 49. Le Image, RL/FT, remove 3-screws, arrows, loosen 2-screws, arrow. Set panel aside for later use. YELLOW BLUE 50. Right Image, VersaSafe, remove the 3-screws, arrows. Loosen the 2-screws, arrows. Set panel aside for later use. Triton Systems © TDN 07103-00470 Rev: B...
- Page 17 57. Le Image, rotate the keypad counterclockwise, arrow, until it stops. 58. Center Image, pull keypad off plate and pull wire through opening. YELLOW 59. Right Image, remove the plate screws, arrows, and plate. Triton Systems © TDN 07103-00470 Rev: B...
- Page 18 Wiggle and pull out cables, arrows. 66. Center Image, remove the battery wires and battery box from vault door. YELLOW 67. Right Image, remove the black bushing, arrow, and slide off communication cable. Triton Systems © TDN 07103-00470 Rev: B...
- Page 19 69. Center Image, pull keypad off and pull wire through opening. YELLOW 70. Right Image, remove the plate screws, arrows, and the plate. E E L : E S Triton Systems © TDN 07103-00470 Rev: B...
Need help?
Do you have a question about the 06100-06085 and is the answer not in the manual?
Questions and answers